Gr5 Titanium Plate Sheets

Gr5 titanium alloy was heated for a long time below 430℃ to form a very thin and protective oxide film. With the increase of heating temperature, the oxide film thickens and its protection becomes worse. The oxide film thickness of the alloy reaches 25μrn after heating at 700°C for 2h. A thin oxide layer is formed by heating at temperatures above 800℃. After heating at 1000℃ for 1 hour, the thickness of the oxide layer reaches 0.65mm.

Ti-6Al-4V ELI titanium alloy is an ultra-low gap variant of Ti-6Al-4V. The overall chemical composition of Ti6Al4V ELI is very close to that of Ti6Al4V, but the content of interstitial elements in the former is much lower than that of the latter. Due to its good biocompatibility, low weight, durability and corrosion resistance, it is an ideal metal for medical devices and implants.

During the melting process, interstitial elements such as iron and oxygen are strictly controlled to improve the ductility and fracture toughness of the alloy. It maintains good toughness even at low temperatures as low as -253℃. These properties, along with low modulus of elasticity and good fatigue strength, make Ti-6Al-4V ELI widely used in a wide range of applications, including medical equipment, surgical implants, aerospace components, structural components, cryogenic applications, offshore equipment.

Hot Tags: gr5 titanium plate sheets, China gr5 titanium plate sheets manufacturers, suppliers, factory, titanium, Pure Titanium Plate, Gr2 pure titanium plate, titanium sheet plate, slotted titanium plate, cut titanium plate, titanium plate trial order