A titanium grade 5 seamless tube could be manufactured from hollow billet by any cold reducing process or cold drawing process. This process is one that will yield a seamless Titanium Gr 5 High Pressure Tube, thereby meeting the requirements prescribed. Alternatively, the Titanium Grade 5 Welded Tube is to be made from a flat rolled product by using an automatic arc welding process on the alloy.
Grade5, UNS R56400, 3.7164, Ti-6Al-4V is the most widely used α+β titanium alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good welding processability and the ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it has also been widely recognized in the medical industry.
Specification
STM B338-17e1 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
| ASTM B338 Titanium Alloy Tubes Specification | ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862 |
| ASTM B338 Titanium Alloy Tubes Grades | Grade 1 , Grade 2, Grade 3 , Grade 5 , Grade 7, Grade 8, Grade 9, Grade 11, Grade 12, Grade 23, UNS R50250, UNS R50400, UNS R56400, UNS R52400, UNS R56320, UNS R53400, Ti-6Al-4V, C-130AM, C-110M, Ti-4Al-3Mo-1V, Ti-6Al-2Sn-4Zr-2Mo, Ti-8Al-1Mo-1V, Ti-13V-11Cr-3Al, Ti-15V-3Cr-3Sn-3Al |
| ASTM B338 Titanium Alloy Tubes Type | Hot Rolled / Cold Drawn / Welded / ERW |
| ASTM B338 Titanium Alloy Tubes Outer Diameter Size | Seamless - 1/4"NB to 12"NB (Nominal Bore Size) Welded / ERW- 1"NB to 16"NB (Nominal Bore Size) |
| ASTM B338 Titanium Alloy Tubes Wall Thickness | Schedule 10 to Schedule 160 |
| ASTM B338 Titanium Alloy Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| ASTM B338 Titanium Alloy Tubes Pipe Ends | Plain Ends / Beveled Ends |
| ASTM B338 Titanium Alloy Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| ASTM B338 Titanium Alloy Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| ASTM B338 Titanium Alloy Tubes Other Testing | ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc. |
| ASTM B338 Titanium Alloy Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| ASTM B338 Titanium Alloy Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| ASTM B338 Titanium Alloy Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| ASTM B338 Titanium Alloy Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| ASTM B338 Titanium Alloy Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Chemical Composition
| Element | Chemical Composition % | ||||||||
| Grade 1 | Grade 2 | Grade 3 | Grade 5 | Grade 7 | Grade 9 | Grade 11 | Grade 12 | Grade 23 | |
| Nitrogen, max | 0.03 | 0.03 | 0.05 | 0.05 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 |
| Carbon, max | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 |
| Hydrogen, max | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.0125 |
| Iron, max | 0.20 | 0.30 | 0.30 | 0.40 | 0.30 | 0.25 | 0.20 | 0.30 | 0.25 |
| Oxygen, max | 0.18 | 0.25 | 0.35 | 0.20 | 0.25 | 0.15 | 0.18 | 0.25 | 0.13 |
| Aluminum | … | … | … | 5.5-6.75 | … | 2.5-3.5 | … | … | 5.5-6.5 |
| Vanadium | … | … | … | 3.5-4.5 | … | 2.0-3.0 | … | … | 3.5-4.5 |
| Tin | … | … | … | … | … | … | … | … | … |
| Ruthenium | … | … | … | … | … | … | … | … | … |
| Palladium | … | … | … | … | 0.12-0.25 | … | 0.12-0.25 | … | … |
| Molybdenum | … | … | … | … | … | … | … | 0.2-0.4 | … |
| Chromium | … | … | … | … | … | … | … | … | … |
| Nickel | … | … | … | … | … | … | … | 0.6-0.9 | … |
| Niobium | … | … | … | … | … | … | … | … | … |
| Ziconium | … | … | … | … | … | … | … | … | … |
| Silicon | … | … | … | … | … | … | … | … | … |
| Residuals, max each | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Residuals, max total | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
| Titanium | balance | balance | balance | balance | balance | balance | balance | balance | balance |
Mechanical Properties
ASTM B338 Tensile Strength of Titanium Tubes
| Grade | Tensile Strength, min | Yield Strength (0.2% Offset) | Elongation 2 in. or 50 mm | |||||
| min | max | |||||||
| Ksi | (Mpa) | Ksi | (Mpa) | Ksi | (Mpa) | gage length min % | ||
| Grade 1 | 35 | (240) | 25 | (170) | 45 | (310) | 24 | |
| Grade 2 | 50 | (345) | 40 | (275) | 65 | (450) | 20 | |
| Grade 3 | 65 | (450) | 55 | (380) | 80 | (550) | 18 | |
| Grade 5 | 130 | (895) | 120 | (828) | … | … | 10 | |
| Grade 7 | 50 | (345) | 40 | (275) | 65 | (450) | 20 | |
| Grade 9 | 90 | (620) | 70 | (483) | 45 | … | 15 | |
| Grade 11 | 35 | (240) | 25 | (170) | … | (310) | 24 | |
| Grade 12 | 70 | (483) | 50 | (345) | … | … | 18 | |
| Grade 23 | 120 | (828) | 110 | (759) | … | … | 10 | |
| Titanium Grade 5 Tubing Standards | ASTM B338 / ASME SB338 |
|---|---|
| Titanium Grade 5 Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| Titanium Grade 5 Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Titanium Alloy Grade 5 Tubing Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| ASME SB338 Titanium Alloy Grade 5 Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| Ti. Alloy Grade 5 Tubing Length | Single Random, Double Random, Standard & Cut length Tube |
| ASME SB338 Titanium Alloy Grade 5 Tubing Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Form | 'U' bent, Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
| Types of Titanium UNS R56400 Tubing | Seamless, ERW, EFW, Welded, Fabricated Tube / Tubing |
| Titanium UNS R56400 Tube End | Plain End, Beveled End, Treaded Tube |
| Marking | All ASTM B338 Titanium Gr 5 Tubing are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer's request.) |
| Application & uses of Titanium Grade 5 Tube | Oil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube, |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | ASTM B338 Titanium Gr 5 Capillary Tube & Other Odd Size Gr 5 Alloy Heat Exchanger & Condenser Tube |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
|
|
|
|
We can also cut, thread, and groove Gr. 5 Alloy Tube to meet your specifications. Titanium Grade 5 Tube Dimension ANSI/ ASME B36.10, B36.19, B2.1 |
|
Titanium is an important structural metal developed in the 1950s, which widely used in various fields because of their high strength, good corrosion resistance, and high heat resistance. The first practical titanium alloy is Ti-6Al-4V alloy which successfully developed in 1954. Due to its heat resistance, strength, plasticity, toughness, formability, weldability, corrosion resistance and biocompatibility. It has become the flagship alloy in the titanium alloy industry, and the amount of this alloy used has accounted for 75% to 85% of all titanium alloys. Many other titanium alloys can be regarded as modifications of Ti-6Al-4V alloy.
Applications
The Titanium Alloy Tubes is used in the following applications:-
Chlorination systems
Flue gas scrubbers
Outlet ducting and stack liners for power plants, pulp and paper bleach plants, sulfur dioxide scrubbers, and weld overlay of less corrosion resistant metals
Acid production and pickling systems
Pharmaceutical industries use alloy fittings and tubing to avoid contamination caused by corrosion related failures
Cellophane manufacturing
Chlorination systems
Pesticide production
Incineration scrubber systems
Chemical process industry in equipment like flue gas scrubbers, chlorination systems, sulfur dioxide scrubbers, pulp and paper bleach plants, pickling systems, and nuclear fuel reprocessing
Waste water processing
Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings
Flue gas desulfurization systems
Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping
Sour gas wells
Pulp and paper production
Waste treatment
Pharmaceutical and food processing equipment
Titanium products that GNEE can provide
Titanium CNC machined parts
|
Custom CNC Machining Parts of Most Materials
|
||||
|
Quotation
|
According to your drawing(size, material, thickness, processing content, and required technology, etc)
|
|||
|
Materials Avaiable
|
Titanium,Brass,Stainless Steel,Q235&Q345 steel, Zinc-plate Sheet,Stainless Steel, Aluminum,Copper, etc.
|
|||
|
Surface Treatment
|
Zinc Plating, chrome plate, powder coating, anodizing, wire drawing, silk-screen printing, etc
|
|||
|
Processing
|
Laser Cutting, Precision Stamping, CNC Bending, CNC Milling, CNC Turning, Threading, Riveting, Drilling, CNC Punching,Die Casting, Laser Welding, etc.
|
|||
|
Testing Equipment
|
CMM/Tool microscope/multi-joint arm/Automatic height gauge/Manual height gauge/Dial gauge/Roughness measurement
|
|||
|
Drawing Formats
|
PRO/E, Auto CAD, Solid Works , UG, CAD / CAM / CAE, PDF
|
|||
|
Our Advantages
|
1.) 24 hours online service & Quickly Quote/Delivery.
2.) 100% QC quality inspection before delivery, and can provide quality inspection form.
3.) 18+ years of experience in the CNC machining area and have a senior design team to offer perfect modification suggestions. |
|||
|
Tolerance丨Surface Roughness
|
Generally +/-0.1-0.2mm
|
|||
|
Sample service
|
Avaliable before bulk order. Samples charge according your design, The sample fee can be used as the payment for mass goods.
|
|||
|
Product Name
|
Customized Titanium Tube Seamless Titanium Tube Welding Titanium Tube
|
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
Grade 1-Unalloyed titanium
Grade 2-Unalloyed titanium
Grade 3-Unalloyed titanium
Grade 7-Unalloyed titanium plus 0.12 to 0.25 %palladium
Grade 9-Titanium alloy (3 % aluminum, 2.5 % vanadium)
Grade 12-Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
|
|
Standard
|
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862,AMS4911,AMS4928
|
|
Shape
|
Round Square Rectangle
|
|
Type
|
Seamless/Welded
|
|
|
Seamless titanium tube: Titanium sponge-Compacting electrodes-melting-Forge-Bar billets-Extruding-Rolled-Straightening-Seamless tube
Welded titanium tube: Titanium sponge-Compacting electrodes-melting-Forge-Plate billets-Hot rolled-Cold rolled-Titanium scrap-Welded-Welded tube |
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
Application
|
1) Heat Exchanger, Condensers, Water Treatment, Desalination
2) Fluid, gas and oil transport
3) Pressure and heat transmission
4) Construction and ornament
5) Motorbycle and bike
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Product name |
Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy rod |
|
Standard |
ASTM B348/ASTM F136/ASTM F67/AMS 4928/AMS 4965L |
|
Grade |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 |
|
Diameter |
6-500mm,customizable |
|
Length |
Max6000mm |
|
Supply state |
Hot working state, Cold working state, Annealed state, Solid solution state |
|
Surface |
Acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
|
Item |
Titanium plate,Titanium sheet |
|
Grade |
GR1,GR2,GR5,GR7,GR9,GR12,GR23,etc. |
|
Size |
0.3-80mm≤300-1500mm≤12000mm or as your request |
|
Standard |
ASTM B265, ASME SB265,AMS491 |
|
Material |
pure titanium ( gr1, gr2, gr3,gr4) |
|
Titanium Alloy(GR5, GR7,GR9,GR23,TI-6AL-7NB) |
|
|
Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-2Sn-4Zr-6Mo |
|
|
Ti-V(15wt%)-Cr(3wt%)-Sn(3wt%)-Al(3wt%) |
|
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|
Application |
Chemical industry, Aerospace, Industry, etc. |
|
Feature |
High strength, Corrosion resistance, High performance |
|
Technics |
Hot rolled,Cold Rolled |
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|
Product name |
Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy wire |
|
Standard |
ASTM B348/ASTM F136/ASTM F67/AMS 4928/AMS 4965L |
|
Grade |
Gr5ELI |
|
Diameter |
0.2-500mm,customizable |
|
Length |
Max6000mm |
|
Supply state |
Hot working state, Cold working state, Annealed state, Solid solution state |
|
Surface |
Acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
why choose us
why choose our products
Since our establishment in 2008, our company has focused on the research, development, production, and export of high-quality titanium alloy products. We utilize advanced production equipment and are equipped with a full suite of precision testing instruments, including advanced spectrometers and ultrasonic flaw detectors. From raw materials to finished products, we rigorously control material composition, mechanical properties, and microstructure to ensure that all titanium and titanium alloy products meet international standards. If you have any questions, please contact us today!
Email:sale@gneemetal.com
