Grade 4 in the CP Titanium Family
Titanium Grades 1 to 4 are unalloyed and generally known as commercially pure titanium. The tensile and yield strength of titanium generally increases with the grade number, and Grade 4 is the strongest of the four. Titanium is about 30 percent stronger than steel but nearly 50 percent lighter, and although aluminum is lighter, titanium is stronger and has excellent strength retention. Due to titanium's weight, strength and high corrosion resistance, it is very popular in manufacturing industries from aerospace, medical, shipping and military to chemical processing, and Grade 4 is the CP grade chosen where the maximum strength of the pure family is needed.
Chemical Composition Limits
The composition of Grade 4 is defined by its limits: carbon 0.08 percent maximum, iron 0.50 percent maximum, nitrogen 0.05 percent maximum, oxygen 0.40 percent maximum and hydrogen 0.015 percent maximum, with the balance titanium. The oxygen limit of 0.40 percent is the highest of the CP grades and is the principal reason for the higher strength, and the low hydrogen limit protects against hydride embrittlement. The composition is verified by analysis per heat, and the limits are the same across the product forms.
Typical Mechanical Properties
Annealed Grade 4 sheet has a minimum tensile strength of about 552 MPa, with a yield strength of about 483 to 655 MPa and an elongation of about 15 percent, as defined by the relevant military and aerospace specifications. The strength is roughly double that of Grade 1, and it approaches the level of some alloyed grades while retaining the corrosion resistance and weldability of the CP family. The mechanical properties are verified by tensile testing, and the acceptance values follow the product specification.
Availability and Forms
Grade 4 titanium is available in bar, billet, extrusion, plate, sheet, strip, wire, pipe, forging stock and tube forms. The heat exchanger tube form is produced as seamless or welded tubing to ASTM B338, with the diameter and wall matched to the heat exchanger design, and the tubes are supplied in the annealed condition with the required surface finish. The full range of stock sizes is available, and custom dimensions are produced on request with the appropriate lead time.
Applications in Heat Exchangers
Grade 4 heat exchanger tubes are used where the higher strength of the CP family is required: high-pressure heat exchangers, condensers and cooler bundles where the tube must carry pressure with a thinner wall than Grade 2 would allow. The corrosion resistance of Grade 4 matches the CP family, so the tubes serve seawater-cooled condensers, chemical heat exchangers and process coolers. The higher strength also improves the resistance to vibration and external pressure in the tube bundle, extending the service life of the exchanger.
Selection Considerations
Select Grade 4 where the combination of CP corrosion resistance and maximum pure-grade strength is required, and where the forming requirements allow the lower ductility of the grade. For heat exchanger tubes, confirm the applicable specification and the test requirements, including pressure testing and non-destructive testing, and verify that the tubes meet the mechanical properties of the specification. The selection between Grade 2 and Grade 4 is a design trade between formability and strength, with Grade 4 chosen where pressure or external load dominates.
Frequently Asked Questions
What is the strength of annealed Grade 4 sheet? minimum tensile strength of about 552 MPa with yield strength of about 483 to 655 MPa.
What is the oxygen limit of Grade 4? 0.40 percent maximum, the highest of the CP grades, which is the source of its higher strength.
What forms is Grade 4 available in? Bar, billet, extrusion, plate, sheet, strip, wire, pipe, forging stock and tube.
Why use Grade 4 instead of Grade 2 for tubes? The higher strength allows thinner walls for the same pressure and improves vibration resistance.
What tests verify Grade 4 tubes? Pressure testing, non-destructive testing and tensile verification against the specification.





