Nov 03, 2025 Leave a message

ASTM-B338.pdf

ASTM B338 Grade 7 Hydraulic Precision Titanium Tubing

The Role of Palladium in Grade 7 Titanium

Grade 7 titanium, designated UNS R52400, is based on the Grade 2 chemistry with the addition of 0.12 to 0.25 percent palladium. Palladium shifts the electrochemical potential of the alloy in the noble direction, so the protective oxide film remains stable even in mildly reducing environments where plain commercially pure titanium can corrode. This small alloying addition creates a material that behaves like Grade 2 mechanically but offers far wider chemical service capability.

Composition and Mechanical Properties

Apart from palladium, Grade 7 has the same limits as Grade 2: 0.30 percent iron, 0.25 percent oxygen, 0.08 percent carbon, 0.03 percent nitrogen and 0.015 percent hydrogen. The mechanical properties are also identical to Grade 2, with a minimum tensile strength of 345 MPa and a minimum yield strength of 275 MPa. Because the palladium addition does not disturb the alpha microstructure, the alloy keeps the good formability and weldability that make the pure grades easy to fabricate.

Corrosion Resistance in Reducing Media

Plain titanium performs best in oxidizing environments, but Grade 7 extends the passive range into reducing acids such as dilute hydrochloric and sulfuric acid. The palladium addition also suppresses crevice corrosion in hot chloride solutions and in seawater at elevated temperature, which is why Grade 7 is frequently used where crevices are unavoidable. This combination of broad corrosion resistance and moderate strength makes Grade 7 a cost-effective alternative to more expensive nickel-based alloys in many chemical services.

Precision Manufacturing of Hydraulic Tubing

Precision hydraulic tubing is produced by cold pilgering or drawing with close control of outside diameter, wall thickness and ovality, followed by annealing and straightening. The smooth bore and tight dimensional envelope allow the tubing to be connected with compression fittings and swaged couplings without leaking. Surface finish is inspected to avoid scratches that could act as stress raisers under hydraulic pulsation.

Hydraulic and Chemical Applications

Grade 7 precision tubing serves hydraulic control lines on offshore platforms, instrument and impulse lines in chemical plants, and heat exchanger tubing in processes that handle mixed oxidizing and reducing streams. It is also used in marine systems where chloride crevice corrosion has damaged other materials, and in geothermal and desalination equipment. The tubing can be bent, flared and welded using the same techniques as Grade 2.

Welding and Fabrication Guidance

Grade 7 is welded with filler metal matching its composition, normally using gas tungsten arc welding with argon shielding on both the face and the root of the joint. Cleaning with acetone or an approved solvent before welding removes oils and shop dirt. The weld metal retains the corrosion resistance of the parent material, so no post-weld chemical treatment is required beyond removal of surface oxide layers when specified.

Frequently Asked Questions

Q: What makes Grade 7 different from Grade 2 titanium?

A: Grade 7 contains 0.12 to 0.25 percent palladium, which stabilizes the passive film in reducing acids and prevents crevice corrosion, while mechanical properties remain the same as Grade 2.

Q: Where is Grade 7 titanium tubing normally used?

A: It is used in chemical plant instrument and impulse lines, offshore hydraulic systems, heat exchangers, geothermal equipment and marine systems exposed to hot chlorides.

Q: What are the mechanical properties of Grade 7 tubing?

A: Grade 7 provides a minimum tensile strength of 345 MPa and a minimum yield strength of 275 MPa, matching Grade 2 with identical composition limits apart from palladium.

Q: Can Grade 7 tubing be welded without losing corrosion resistance?

A: Yes. Welding with matching filler and proper argon shielding preserves the palladium-bearing weld chemistry, so the joint retains the corrosion resistance of the parent tube.

Q: Is Grade 7 titanium available as precision drawn tubing?

A: Yes. Cold pilgering and drawing produce tight outside diameter and wall tolerances with a smooth bore, suitable for compression fittings and swaged couplings in hydraulic systems.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry