Apr 03, 2024 Leave a message

Cutting performance of Ti-6AL-7Nb titanium alloy materials

Ti-6AL-7Nb titanium alloy material cutting technology is the industry's focus on key technologies, fully embodies the connotation of "science and technology is the first productive force". This paper summarizes the cutting characteristics of titanium alloy, cutting tool materials, tool structure, the acquisition of efficient cutting parameters of titanium alloy and the process countermeasures taken to improve tool durability and processing efficiency through the cutting practice of the whole blade disc and compressor magazine of titanium alloy materials, hoping to play a role in some references.
In order to improve the reliability and thrust of the engine, the advanced high-performance engine adopts a large number of new materials, and its structure is becoming more and more complex, and the machining precision requirements are becoming higher and higher, which puts forward higher requirements for the manufacturing process. In the new generation of aero-engine performance improvement, manufacturing technology and materials contribution rate of 50% ~ 70%; in the engine weight reduction, manufacturing technology and materials contribution rate of 70% ~ 80%, which also fully demonstrates that advanced materials and technology is the aero-engine to realize the key to weight reduction, efficiency and performance improvement.
Titanium alloy materials have been more and more widely used in the aviation field due to their excellent properties such as high specific strength, low density, corrosion resistance, high temperature resistance and good weldability. Based on the above advantages, titanium alloy material has become the preferred material for some parts.
Cutting characteristics of titanium alloy materials:
Some of the physical and mechanical properties of titanium alloys bring greater difficulty to cutting and processing. Titanium alloy cutting deformation coefficient is small, making the chip in the front face of the sliding friction distance increases, accelerating tool wear. Titanium alloy thermal conductivity is small, the heat generated during cutting is not easy to transmit, concentrated in a small area near the cutting edge. Titanium alloy modulus of elasticity is small, processing in the radial force is easy to produce bending deformation, causing vibration, increasing tool wear and affecting the accuracy of the parts. Due to the strong chemical affinity of titanium alloy to the tool material, the cutting temperature is high and the cutting force per unit area is large under the conditions, the tool is prone to bonding wear.
Reasonable selection of tool materials :
Tool material is one of the important factors affecting the cutting process, so the rational choice of tool material is an effective way to solve the problem of cutting difficult-to-machine materials. Titanium alloy material cutting tool with carbide tools, coated tools, cubic boron nitride (CBN) tools, diamond tools and high-performance high-speed steel tools and so on. Different materials of the knife has a specific adaptation to the processing range, its life also has differences. The characteristics of the processed material is often the basic basis for selecting the tool material, while the cutting performance of the tool material and the workpiece material should be reasonably matched. The performance of the tool material on the machining surface quality, machining efficiency and tool life has an important impact. When the machined part structure is special, weak rigidity, process and can not enhance its rigidity, cutting vibration will occur. At this time, the selection of tools need to consider the tool material has a certain degree of toughness, to avoid the phenomenon of tool chipping, resulting in the tool scrap too quickly.

Ti6AL4V Sheet Gr5 Titanium PlateHigh Quality Gr1 Titanium PlateGr4 Pure Titanium Plate

 

 

Optimization of tool structure:
The cutting performance of the tool not only depends on the tool material, but also relates to the structure and geometry of the tool. When cutting difficult-to-machine materials, the appropriate tool geometry helps to give full play to the cutting performance of the tool and improve cutting efficiency. The main geometric parameters of the tool are the front angle, the back angle, the main angle of deviation, the vice angle of deviation, the angle of inclination and the radius of the tip of the rounded corner and so on. The larger the front angle of the tool, the sharper the tool, the smaller the cutting force, suitable for finishing. Titanium alloy has been machined surface material rebound, the use of large back angle can reduce the workpiece on the back of the surface caused by friction and bonding phenomena, and reduce the wear of the back of the surface. Roughing, in order to increase the strength of the tool, it is appropriate to use a small back angle. Cutting titanium alloy with high cutting temperature and large elastic deformation tendency, under the condition that the rigidity of the process system is allowed, the main deflection angle should be reduced as much as possible in order to increase the heat dissipation area of the cutting part and reduce the load per unit length of the cutting edge. Reducing the secondary deflection angle can strengthen the tip of the tool, which is conducive to heat dissipation and reduce the machining surface roughness value. In the blank has hard skin and surface organization is not uniform state, rough turning cutting edge is easy to collapse, in order to increase the strength and sharpness of the cutting edge, should increase the sliding speed of cutting, choose the appropriate edge tilt angle.
Domestic scholars through the high-speed milling processing numerical simulation research, the high-speed milling process is simplified, the establishment of the bevel cutting geometry model and finite element model. These models predict the cutting force under different combinations of tool geometry parameters in the high-speed cutting process, providing a basis for tool selection in high-speed CNC milling. In recent years, in the processing of complex structural parts with deep cavities, the overall geometry of the toolholder has also attracted the attention of engineers and technicians. For example, in the fine milling of the hub and blade profile of the integral leaf disk, it is necessary to use an integral carbide straight shank ball cutter. When the pitch between the two blades is too narrow or the root of the blade and the hub transfer R is small, the tool diameter decreases. In order to enhance the rigidity of the tool and improve the machining efficiency, a taper shank ball tool is often used. Especially in the use of large aspect ratio tool conditions, and straight shank ball cutter compared to the taper shank ball cutter so that the rigidity of the tool system to enhance the tool can make the tool to increase the amount of feed per tooth, processing is not easy to break, the effect is far better than the straight shank ball cutter.
Process countermeasures to improve tool durability and machining efficiency:
When cutting titanium alloy, the cutting temperature is high in the area near the cutting edge, mainly due to the high temperature thermal effect that exacerbates tool wear. For cemented carbide tools, the wear is mainly adhesive wear caused by bonding temperature. In the case of tool diameter allows, can try to use with internal cooling function of the tool, this tool spray coolant angle just concentrated in the tip of the region, can effectively reduce the temperature of the cutting area, extend the life of the tool, improve the durability of the tool. Usually the diameter of the internal cooling tool is larger, for small curvature radius of the surface or area, you can pre-emptively use a large diameter tool with internal cooling for roughing to improve machining efficiency. Milling is a discontinuous cutting process, machining tools to withstand intermittent impact loads, found in milling, the rigidity of the process equipment system is poor, in the cutting force, clamping force, cutting vibration and other factors, tool wear increased, durability decreased significantly. The same cutting test, according to the degree of tool wear and processing time to determine, but usually leave a certain margin. Conventional machining, machine tool operators can be based on machine vibration changes, cutting noise suddenly increased, the spindle power display table to determine the situation of tool wear. If the application of automatic tool breakage monitoring technology in machining, can dynamically and accurately at any time to analyze and monitor the state of tool wear, the tool life can be safely and moderately extended.

Titanium alloy efficient cutting parameters acquisition:
Enterprises have met the demand for optimization and verification of tool trajectories in current product manufacturing, but have not yet fully solved the problem of acquisition methods for optimized cutting parameters. In recent years, enterprises are actively researching high-efficiency cutting technology for titanium alloys. It is reported that the cutting speed of large titanium alloy integral leaf disk in western countries can reach 300mm/min or higher. Aero-engine manufacturing enterprises have the advanced imported machine tools and foreign enterprises are comparable, cutting a considerable part of the tools used are also imported tools, it can be said that from the hardware has the same strength, but the gap between the processing efficiency and foreign countries is not small, especially titanium alloys and other difficult-to-machine materials, machining efficiency urgently needs to be improved, analyzed the existence of some of the following reasons:
(1) targeted basic cutting test is insufficient, it is difficult to get a higher cutting speed parameters to do process decision-making support.
(2) Enterprises have limited access to cutting parameters channels, usually from the tool supplier manual recommended data. Although this parameter is from the foreign supplier more systematic cutting test data, but the test conditions and environment and the enterprise processing parts of different working conditions, it is difficult to completely copy the manual data.
(3) High-efficiency cutting parameter testing and acquisition of a longer period. Due to the enterprise machine tool to product mass production as the main body, it is difficult to spare special equipment to carry out special tests, cutting data optimization test is often synchronized with the processing of real parts, there is a greater risk. Especially in the finishing process, after cutting the surface of the part has no margin, to take into account in case of improper use of cutting parameters, resulting in broken knives, chipping or other very easy to cause surface quality problems. Therefore, the selection of efficient cutting parameter test data need to be gradually enhanced in stages, careful and prudent, it is not possible to quickly improve in a relatively short period of time. Often need multiple batches, multiple parts processing verification, and even last for several years, from the verification machine to the prototype, and even the product into the finalization stage is still in the process of improving the processing efficiency of the lean improvement.
(4) The engineering promotion and application of the research results of research institutes are not sufficient. In fact, research institutes attach great importance to the efficient machining of difficult-to-machine materials, and have conducted a large number of tests and made some achievements. However, the cutting test is not entirely based on the real machining environment of the engine parts, including the test parts selected process characteristics of data such as: the real size of the parts, structural shape, part rigidity, clamping mode, tool extension, etc. Therefore, it is a common test but not a common test. Therefore, it is a common test rather than a typical feature test, so the cutting parameters have limitations in practical applications. As a business side of the urgent need to get the technical support of research institutes, joint cooperation, in order to accelerate the pace of technological innovation and enhance the manufacturing capacity of enterprises. Most of the foreign efficient (high-speed) cutting parameters from the cutting laboratory set up in the enterprise, according to the test results to guide the production site, usually large-scale enterprise cutting laboratory scientific research capabilities and universities are not different. This research system has a strong target, fast results, easy to promote the advantages of a comprehensive.
With the rapid development of digital manufacturing technology, the finite element simulation of metal cutting process as a new technology of manufacturing process, is gradually integrated into the field of machining, is to promote the future of efficient cutting process is one of the ways of rapid development. Cutting simulation can not only predict the cutting force and analyze the distribution of state variables such as strain, strain rate, stress and temperature during the cutting process, but also predict tool wear, workpiece residual stress and further optimize the cutting parameters. The introduction of the finite element method has enriched the research means of titanium alloy cutting mechanism . Researchers have studied the simulation prediction of tool wear in titanium alloy machining, and established a simulation model under the comprehensive consideration of multiple tool wear factors, which can realize the simulation prediction of tool wear to a certain extent. With the continuous development of numerical computation theory and software tools, cutting process simulation and prediction will certainly play an important role in the research of cutting processing theory and technology.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry