Precautions for using titanium rod filters

1. Avoid scratches, collisions, dust, and oil stains.
2. The working pressure should not exceed the rated working pressure during use.
3. During normal use, there should be at least 3-5 minutes of low-pressure start-up time, and the relative pressure difference should be controlled below 0.5Mpa. Then, gradually adjust the working pressure to the normal level (high pressure should not exceed 0.4Mpa).
4. After a certain period of operation, this product may experience an increase in pressure and a decrease in flow rate due to clogged filtering elements, requiring backwashing or regeneration. The regeneration cycle depends on the rated pressure and flow rate