Jan 21, 2026 Leave a message

TA7 Alloy: Composition, Tensile Strength

What is TA7 titanium?

TA7 alloy is a medium-strength, single-phase α-type titanium alloy with a nominal composition of Ti-5Al-2.5Sn. It offers excellent comprehensive properties from low temperatures up to 500°C, including high specific strength, good plasticity, low notch sensitivity, and excellent weldability. Due to these characteristics, TA7 alloy is widely used in the aerospace industry for manufacturing critical components such as low-temperature service structural parts, casing shells, wall panels, and fasteners.

A notable feature of TA7 alloy is its relatively narrow forging temperature range, which, if not properly controlled during hot working, can easily lead to cracking. Furthermore, its microstructure and mechanical properties are very sensitive to the forging temperature range and the amount of deformation, often resulting in defects like unacceptable microstructure or substandard mechanical performance and consequently lower final product yield. Therefore, strict control of process parameters is essential in production to ensure the material meets standard requirements.

With advancements in material preparation technology, improved versions such as TA7 ELI (Extra Low Interstitial) have emerged. Advanced forming processes like Selective Laser Melting (SLM) can further enhance the material's density and mechanical properties. Research shows that TA7 ELI alloy prepared with optimized parameters can achieve a density of 99.89%, tensile strength exceeding 1050 MPa, and an elongation of 15%. This opens up more possibilities for TA7 alloy applications in high-end manufacturing.

Apply for Free Sample

Chemical Composition and Governing Standards

Chemical Composition Analysis

The chemical composition of TA7 alloy is strictly defined by the national standard GB/T 3620.1. Its main components are titanium (Ti) as the base element, aluminum (Al) content ranging from 4.0% to 6.0%, and tin (Sn) content ranging from 2.0% to 3.0%. This ratio is designed to enhance the alloy's strength and heat resistance through solid solution strengthening while maintaining the stable crystal structure of an α-type titanium alloy.

In addition to the main alloying elements, TA7 alloy has strict limits on impurity content to ensure material stability and reliability. Key impurity limits include: iron (Fe) ≤0.30%, silicon (Si) ≤0.15%, carbon (C) ≤0.10%, nitrogen (N) ≤0.05%, hydrogen (H) ≤0.015%, and oxygen (O) ≤0.20%. Controlling the content of interstitial elements O, N, and H is particularly important as they significantly affect the alloy's plasticity and toughness. For special-purpose versions like TA7 ELI, the control requirements for these impurities are even stricter.

 

Overview of Governing Standards

The quality control and production of TA7 alloy material follow a series of national standards and industry specifications.

GB/T 3620.1: The most fundamental standard for TA7 alloy, specifying grades and chemical composition. It ensures consistency across different production batches and manufacturers.

GB/T 6612-1986: Specifically for TA7 alloy plates, specifying product condition, specifications, and mechanical property requirements. Plates are classified into manufacturing methods (hot-rolled or cold-rolled) and supply conditions (e.g., hot-worked (R), annealed (M), cold-worked (Y)).

For specific products or applications, such as critical aerospace components, stricter industry or internal company standards are often followed, forming a complete standard system for TA7 alloy.

14
27
18
6

Detailed Mechanical Property Indicators

Room-Temperature Mechanical Properties

TA7 alloy exhibits a balanced combination of strength and plasticity at room temperature. According to GB/T 6612-1986, TA7 plates of different thicknesses have corresponding mechanical property requirements.

For thin plates (0.8-1.5 mm): Tensile strength (σb) ≥ 765 MPa, yield strength (σ0.2) ≥ 685 MPa, elongation (δ5) ≥ 20%, bending angle (α) ≥ 50°.

For thicker plates (1.6-2.0 mm): Elongation requirement is ≥ 15%.

For plates (2.1-10.0 mm): Elongation requirement is ≥ 12%, bending angle (α) ≥ 40°.

The strength of TA7 alloy primarily comes from the solid-solution strengthening effect of aluminum and tin.

 

Hardness Characteristics

While specific hardness data for conventional TA7 alloy is not directly provided in the source, research on related alloys indicates that hardness is influenced by factors such as microstructure, processing state, and testing method. Hardness testing is commonly used in engineering as a quick method for quality control.

 

Mechanical Properties via Special Processes

Advanced manufacturing processes can significantly enhance TA7 alloy's mechanical properties.

Selective Laser Melting (SLM): TA7 ELI alloy formed via SLM (with optimized parameters of 280 W laser power and 1000 mm/s scanning speed) can achieve a tensile strength exceeding 1050 MPa and an elongation of 15%.

Powder Metallurgy: TA7 ELI alloy prepared via powder metallurgy and Hot Isostatic Pressing (HIP) at 1000°C, 130 MPa for 3 hours can achieve a relative density as high as 99.5% and a fine equiaxed grain structure with an average grain diameter of about 40 μm, contributing to improved strength and plasticity.

 

Physical Properties and Characteristics

Density and Microstructural Characteristics

TA7 alloy has a density of approximately 4.42 g/cm³, typical for titanium alloys. This low density is the foundation for its high specific strength (strength-to-density ratio) and high specific stiffness (elastic modulus-to-density ratio), providing significant advantages in lightweight aerospace applications.

TA7 is a single-phase α-type titanium alloy, maintaining an α-phase structure at all temperatures without allotropic transformation. This grants it good microstructural stability and weldability but also results in relatively poor plastic deformation capability and the aforementioned narrow forging temperature range.

 

Thermal Stability and Operational Temperature Range

TA7 alloy has good thermal stability, maintaining excellent mechanical properties from low temperatures up to 500°C. This makes it suitable for both cryogenic environments (e.g., spacecraft cryogenic tanks) and medium-temperature working environments (e.g., cold-end parts of aircraft engines).

 

Application Fields and Selection Advice

Main Application Fields

Aerospace Structural Parts: Used for manufacturing low-temperature service structural parts, casing shells, wall panels, and fasteners. Applications include cryogenic tanks for rockets and compressor casings for aircraft engines.

Special Process Components: TA7 ELI alloy is used to manufacture complex-shaped parts via advanced processes like SLM, suitable for lightweight brackets or customized medical implants with internal structures.

Powder Metallurgy Applications: TA7 ELI alloy prepared via powder metallurgy and HIP is used for near-net-shape parts with complex geometries, reducing material waste.

 

Selection Considerations

Condition and Specification Selection: Choose the appropriate manufacturing method and supply condition based on the final application's requirements for mechanical properties and subsequent processing.

Performance Balance: Balance strength, plasticity, toughness, and fatigue performance according to the application scenario. Critical aerospace parts may prioritize toughness and damage tolerance.

Process Compatibility: Consider the alloy's narrow forging window. For complex parts, near-net-shape processes like additive manufacturing or powder metallurgy may be preferred to reduce machining difficulty.

Get Instant Quote & Stock Check

 

Our factory

Our factory specializes in the field of international trade of titanium materials, professionally producing high-quality series products such as titanium tubes, titanium bars, titanium plates, titanium wires, and titanium strips. The factory is equipped with internationally advanced production and testing equipment, including precision forging units, high-speed cold rolling mills, vacuum melting furnaces, CNC spinning machines, continuous drawing production lines, and automated surface treatment systems. Coupled with precision testing instruments such as spectrometers and ultrasonic flaw detectors, we ensure precise control over the entire process from raw materials to finished products. We are committed to providing global customers with titanium products that offer excellent performance and a complete range of specifications through stable and reliable processes and strict quality management, meeting the application needs of high-end industries such as energy, chemical, aerospace, and medical fields.

12261

 

Titanium product packaging

We place great emphasis on the transportation safety and delivery quality of our products. All titanium materials are packaged using strict industrial-grade solutions: titanium tubes and bars undergo anti-rust treatment, are tightly wrapped with waterproof stretch film, and then placed in reinforced wooden or iron boxes lined with moisture-proof paper, with fillers added to prevent sliding and collisions during transportation. Titanium plates and strips are covered with protective film, fitted with edge protectors, separated layer by layer with moisture-proof paper, loaded onto sturdy wooden or steel pallets, and securely fastened with steel straps. Fine titanium wires are neatly coiled onto specialized spools and encapsulated in sealed boxes that are waterproof and dustproof. Each packaging unit is accompanied by clear product labels, material certificates, and moisture-proof indicators, ensuring that the goods remain intact, clearly labeled, and safely delivered to global customers through long-distance sea freight and multimodal transportation.

121721

Request Technical Consultation

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry