Aug 04, 2025 Leave a message

Titanium Casting Finishing and Performance

Titanium castings, due to their high strength, lightweight, and excellent corrosion resistance, are widely used in high-end fields such as aerospace, shipbuilding, automotive, and medical devices. After casting, titanium castings undergo a series of rigorous post-processing steps to fully realize their performance potential and meet stringent user requirements. The following are key steps for proper post-processing of titanium castings:
1. Removing the Oxide Film on the Casting Surface
Titanium easily forms an oxide film in the air, which affects subsequent processing. Common removal methods include:
Mechanical deoxidation: Grinding or polishing with tools such as grinding wheels and sandpaper to remove the surface oxide layer.
Chemical deoxidation: Dissolving and removing the oxide film with acidic solutions such as nitric acid, hydrochloric acid, and sulfuric acid.
2. Heat Treatment to Optimize Microstructure and Properties
Heat treatment is a key process for improving the mechanical properties and microstructure of titanium castings:
Aging: Maintaining the temperature at a specific temperature promotes the formation of a stable structure within the crystals, enhancing the material's strength and hardness.
Annealing: After heating, a controlled cooling rate is used to form uniform, fine grains, significantly improving the material's toughness and plasticity. Normalizing: After heating and holding, the material is air-cooled to room temperature to optimize the material's hardness and strength by adjusting the crystal structure.

1 4
1 7
1 9
1 11

III. Precision Machining
Machining is required to achieve precise dimensional and shape requirements:
Machining methods include milling, turning, drilling, reaming, and grinding.
Critical Controls: Strictly selecting the appropriate cutting speed, depth of cut, and cooling method to ensure machining quality and dimensional accuracy, while avoiding machining difficulties caused by titanium's high strength and high activity.

IV. Surface Treatment to Improve Quality and Corrosion Resistance
Surface treatment aims to improve appearance and enhance protection:

Polishing: Mechanically or chemically removes burrs and roughness to create a smooth surface.

Sandblasting: Using high-pressure gas to spray sand particles to clean the surface, create a uniform texture, and remove residual oxide layers.

Anodizing: Applying electricity in an acidic electrolyte creates a dense oxide film on the surface, significantly improving corrosion resistance and surface hardness. 5. Strict Quality Inspection to Ensure Compliance
After post-processing is completed, comprehensive quality inspection must be conducted:
Inspection items: Includes appearance inspection, dimensional accuracy measurement, mechanical property testing (such as strength and elongation), and chemical composition analysis.
Purpose: Ensure that the casting fully meets design specifications and usage requirements.
6. Standardized Storage and Transportation to Prevent Damage
To prevent re-oxidation or damage to treated castings, the following precautions must be taken during storage and transportation:
Environmental Requirements: Maintain a dry environment.
Protective Measures: Avoid direct contact with other materials and prevent impact and severe vibration.

about Us

The company boasts leading domestic titanium processing production lines, including:

German-imported precision titanium tube production line (annual production capacity: 30,000 tons);

Japanese-technology titanium foil rolling line (thinnest to 6μm);

Fully automated titanium rod continuous extrusion line;

Intelligent titanium plate and strip finishing mill;

The MES system enables digital control and management of the entire production process, achieving product dimensional accuracy of ±0.01μm.

4242

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry