GR5 products provided by Henan Gnee New Material Co., Ltd
Products Description
Ti 6Al-4V is the most widely used of all Titanium grades. It is typically available in the annealed condition and is readily heat treatable to increase strength, for a wide range of applications. As a general-purpose alloy, Ti 6Al-4V has a broad spectrum of desirable properties at temperatures around -210°C – 400°C.
Titanium grade 5 or Ti 6Al-4V is an alpha-beta (α-β) alloy. Therefore, it may be heat treated to give medium-high strength in sections under 100 mm thick. However, hardenability is limited and sections over 25 mm may not fully develop desired properties. Ti 6Al-4V has a good weldability (with matching or ELI filler wire) and hot-formability. The degree of cold forming is, however, limited.
Titanium grade 1 is the most ductile of the commercially pure Titanium grades. As a result, the alloy is widely specified for the manufacture of plate heat exchangers.
Titanium Grade 2 or Titanium CP3 is a commercially pure alpha (α) alloy. Although not as strong as Ti 6Al-4V, Titanium grade 2 has outstanding corrosion resistance against variety of aggressive media. For example, Titanium grade 2 is virtually immune to wet chlorine at 10°C – 80°C (0-0.02 mpy or 0.001 mm/y) and thus, used to make chlorine dioxide mixers, pipework and fasteners in modern bleach plants.
Titanium grade 2 is specified based on its excellent corrosion resistance in environments which include: calcium chloride, cupric chloride, ferric chloride, various concentrations of acetic acid, high temperature seawater, most organic media and more.
However, other conditions such as temperature, pH level and flow velocity could alter its properties drastically e.g. susceptibility to stress corrosion cracking and crevice corrosion. When compared with Titanium grade 5 (Ti 6Al-4V), Titanium grade 2 is generally selected where aqueous corrosion resistance and/or formability are required.
| Properties | Ti 6Al-4V (UNS R56400) | Titanium Grade 2 (UNS R50400) |
|---|---|---|
| Metallurgy | 895 MPa | 345 MPa |
| Ultimate tensile strength | 827 MPa | 276 MPa |
| 0.2% offset yield strength | 827 MPa | 276 MPa |
| % Elongation (Ductility) | 10 | 20 |
| Corrosion resistance | Very good | Outstanding |
| Creep and stress-rupture | High | NA |
| Fatigue | High | NA |
| Service temperature | -210°C – 400°C for reliable structural integrity | Depends on environments e.g. up to 316°C for steam and seawater |
| Weldability | Weldable |










Titanium products provided by Henan Gnee New Material Co., Ltd
|
Grade |
TA1 TA2 TC4 TA9-1 TA18 Gr1 Gr2 GR5 Gr7 GR 9 Gr11 Gr12 |
|
size |
OD. 6mm~13mm Max Length 4m OD.13mm~114.3mm, Max Length 15m WT.0.3mm~12mm |
|
Standard |
GB/T3624 GB/T3625 ASTM B337 B338 B861 B862 ASME SB338 ASME SB337 ASME SB861 SB862 |
|
Dimension (MM) |
Size Range: Φ10-Φ168 x0.5-10x 100-18000 MM Φ 5/8"xBWG20*L |
|
Application |
heat exchanger and Condenser; U Type coil pipe ; Petroleum pipeline ; Sea farming; Evaporator; Fluid Transportation Piping etc. |
|
Inspection Equipment |
100% Nondestructive Tester; UT Testing Detector; Tensile Tester Digital Ultrasonic Detector; Infrared Tester; HV Hardness Tester |
|
Product name |
Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy rod |
|
Standard |
ASTM B348/ASTM F136/ASTM F67/AMS 4928/AMS 4965L |
|
Grade |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 |
|
Diameter |
6-500mm,customizable |
|
Length |
Max6000mm |
|
Supply state |
Hot working state, Cold working state, Annealed state, Solid solution state |
|
Surface |
Acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
|
Item |
Titanium plate,Titanium sheet |
|
Grade |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23,etc. |
|
Size |
0.3-80mm≤300-1500mm≤12000mm or customizable |
|
Standard |
ASTM B265,ASTM F136,AMS 4900,AMS 4901,AMS 4911,AMS 4919,
AMS 4914 |
|
MOQ |
10kg |
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|
Application |
Industrial, Aerospace, Petrochemical, Medical etc. |
|
Feature |
High strength, Corrosion resistance, High performance |
|
Technics |
Hot rolled, Cold Rolled |
|
Surface |
Bright, Polished, Pickling, Sandblasting |
|
Processing Service |
Bending, Welding, Decoiling, Cutting, Punching |
|
Package |
Wooden Box |
|
Product Name
|
Polished 1mm 1.5mm 2mm 3mm Nitinol Shape Memory Straight Wire Nickel Titanium Wire for Medical
|
|
Material Type
|
NiTiCu NiTi, Fe NiTi
|
|
|
Room Temperature(0C - 15C)
Low temperature (Below 0C) High temperature(40C - 120C) |
|
Feature
|
Superelastic or Shape memory
|
|
Standard
|
ASTM F2603-18/12
|
|
Surface
|
Natural Oxide, Pickled/Etched, Centerless Ground and Mechanically-cleaned
|
|
Condition
|
As Cold-Worked, Straight Strain Annealed and Shape Set Annealed.
|
|
Certificate
|
Transformed Temperatures, Tensile Properties, Chemical Composition and Customer Specific Requirements
|
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
|
1. Medical field : with very good biocompatibility with human body, medical nitinol wire can be used in medical field.
2. Eye glasses manufacturer : Low density, high toughness, high stability, biocompability with human boday, nickel titanium
alloy wire is becoming more popular between eye glasses manufacturers. 3. Fishing wire: nickel titanium alloy wire now is widely used as fishign wire because of its high strenght and very good memorability and superelastic. |





