TC4ELI Gr23 Titanium Foil Sheet
What is TC4 ELI (Grade 23) Titanium?
TC4 ELI is the Chinese standard designation (GB/T 3621) for Ti-6Al-4V ELI, fully equivalent to ASTM Grade 23. The "ELI" (Extra Low Interstitial) designation indicates extremely low levels of interstitial elements – particularly oxygen (≤ 0.13%), but also iron, nitrogen, and hydrogen. This refined chemistry provides enhanced ductility, fracture toughness, and biocompatibility compared to standard TC4 (Grade 5).
Key Features of TC4 ELI Titanium:
Medical-Grade Purity: ELI chemistry with oxygen ≤ 0.13% – certified to ASTM F136 and ISO 5832-3
Enhanced Fracture Toughness: Superior resistance to crack propagation compared to standard TC4
Excellent Strength: 860 MPa tensile strength – ideal for load-bearing thin sections
Superior Biocompatibility: Approved for permanent implantable medical devices
Good Formability: Better ductility than standard TC4 due to lower interstitial content
Specifications
| Standard | Designation |
|---|---|
| Chinese GB | TC4 ELI |
| ASTM | Grade 23 |
| UNS | R56401 |
| ISO | ISO 5832-3 (Implants for surgery) |
| DIN | 3.7165 (ELI) |
| EN | EN 3.7165 (ELI) |
| AMS | AMS 4930 |
Chemical Composition (ASTM F136 / GB/T 13810)
| Element | Composition Requirement | Typical Value | Critical for ELI |
|---|---|---|---|
| Titanium (Ti) | Balance | Balance | – |
| Aluminum (Al) | 5.50 – 6.50% | 6.0 – 6.2% | Standard range |
| Vanadium (V) | 3.50 – 4.50% | 4.0 – 4.2% | Standard range |
| Iron (Fe) | ≤ 0.25% | 0.12 – 0.18% | Tighter than Grade 5 |
| Oxygen (O) | ≤ 0.13% | 0.08 – 0.11% | Key ELI differentiator |
| Carbon (C) | ≤ 0.08% | 0.01 – 0.02% | Standard |
| Nitrogen (N) | ≤ 0.05% | 0.01 – 0.02% | Standard |
| Hydrogen (H) | ≤ 0.012% | 0.001 – 0.003% | Tighter than Grade 5 |
| Residuals (each) | ≤ 0.10% | < 0.05% | Standard |
| Residuals (total) | ≤ 0.40% | < 0.20% | Standard |
Mechanical Properties
| Property | ASTM F136 Requirement | Typical Value (Sheet) | Typical Value (Foil) |
|---|---|---|---|
| Tensile Strength (Ultimate) | ≥ 860 MPa | 880 – 950 MPa | 880 – 950 MPa |
| Yield Strength (0.2% Offset) | ≥ 795 MPa | 820 – 900 MPa | 820 – 900 MPa |
| Elongation | ≥ 10% | 12 – 15% | 10 – 15%* |
| Reduction of Area | ≥ 25% | 35 – 45% | – |
| Fracture Toughness (KIC) | – | 65 – 85 MPa√m | 60 – 80 MPa√m |
| Hardness (Rockwell C) | – | 30 – 34 HRC | 30 – 34 HRC |
| Modulus of Elasticity | – | 105 – 115 GPa | 105 – 115 GPa |
Physical Properties
| Property | Value | Units |
|---|---|---|
| Density | 4.43 | g/cm³ |
| Melting Point | 1605 – 1660 | °C |
| Thermal Conductivity | 6.7 – 7.5 | W/m·K (at 20°C) |
| Electrical Resistivity | 1.7 – 1.8 | µΩ·m (at 20°C) |
| Specific Heat Capacity | 560 | J/kg·K |
| Coefficient of Thermal Expansion | 8.6 – 9.2 | µm/m·°C (20 – 200°C) |
| Magnetic Properties | Non-magnetic | – |
| Beta Transus Temperature | 980 – 1010 | °C |
Foil vs Sheet
| Parameter | Foil | Sheet |
|---|---|---|
| Thickness Range | 0.012 mm – 0.3 mm | 0.3 mm – 5.0 mm |
| Typical Applications | Implant foils, micro-devices, flexible components | Surgical instruments, implant blanks, structural components |
| Forming Requirements | Micro-forming, laser cutting | Conventional stamping, bending |
| Surface Finish Options | Electropolished, mirror polished | 2B, pickled, polished |
Applications of TC4 ELI Titanium Foil & Sheet
| Industry | Applications |
|---|---|
| Medical Implants | Cardiovascular devices, orthopedic mesh, implantable foils, bone fixation plates, dental barriers, surgical mesh |
| Surgical Instruments | High-performance micro-surgical tools, instrument components, cutting guides |
| Aerospace (Critical) | Damage-tolerant structures, cryogenic components, critical shims, aerospace honeycomb |
| Cryogenic | Liquid gas handling components, cryogenic barriers, space applications |
| Research | Medical device prototyping, implant development, test specimens |
| Pharmaceutical | Processing equipment, barrier foils, clean room components |
Our Factory
Melting & Primary Processing:
VAR (Vacuum Arc Remelting) Furnaces – Multiple furnaces producing premium quality TC4 ELI ingots with precise chemistry control, ensuring oxygen content below 0.13%
Plasma Arc Melting (PAM) – For extended refining and optimal ELI chemistry
Electron Beam Cold Hearth Melting – For ultra-clean medical-grade material
Hot Processing:
Hydraulic Forging Presses – 3000-ton capacity for ingot breakdown
Plate Rolling Mills – With precise temperature control for uniform properties
Steckel Mill – For coiled sheet production
Cold Rolling:
20-High Sendzimir Rolling Mills – For precision thickness control down to 0.012 mm
4-High Reversing Cold Mills – For sheet and intermediate gauges
Continuous Annealing Lines – With inert atmosphere protection
Vacuum Annealing Furnaces – For contamination-free processing – critical for medical grade

Hot Tags: tc4eli gr23 titanium foil sheet, China tc4eli gr23 titanium foil sheet manufacturers, suppliers, factory, titanium, Pure Titanium Coil Strip, Gr9 Titanium Strip, Titanium Grade 1 Alloy Strip, titanium foil texture, titanium foil diffusion properties, titanium foil alternative
You Might Also Like
Send Inquiry














