Aerospace Titanium Alloy Gr5 Sheet

Aerospace Titanium Alloy Gr5 Sheet. Aerospace Titanium Sheet. Titanium, as a kind of high-performance material, is widely used in aerospace fields of technology. Titanium and Titanium alloy have excellent combination property, such as low density, higher specific strength, higher specific stiffness, fine fatigue and corrosion resistance.

Standards: AMS 4911H, mil-t-9046j, ASTM B265, DMS1592F

Main ingredients: titanium (Ti) allowance, 5.5 aluminum (Al) of 6.8 or less, or less 3.5 V (V) 4.5, or less or less nitrogen (N) 0.05, or less carbon (C) 0.10 or less, hydrogen (H) of 0.015 or less,Iron (Fe)≤0.30, oxygen (O)≤0.20

Physical properties: density 4.51g/cm3

Mechanical performance: tensile strength ≥925Mpa, yield strength ≥870Mpa, elongation ≥10%

Corrosion resistance of Aerospace Titanium Alloy Gr5 Sheet:

Titanium has strong corrosion resistance in many media, especially in neutral and oxidizing media, but also can be used in some dilute reducing acid, such as room temperature up to the boiling point of various concentrations of nitric acid. Good corrosion resistance to most alkali solutions, such as room temperature barium hydroxide, calcium hydroxide, magnesium hydroxide saturated solutions, but not for boiling sodium hydroxide solutions. Titanium is completely resistant to corrosion in sea water and most organic acids (except formic acid and oxalic acid). It has excellent corrosion resistance in wet chlorine gas, chlorite, hypochlorite and other chloride solutions. Corrosion resistance in sodium chloride solution increases with increasing pH value.

Application: aerospace, chemical equipment, etc.

Hot Tags: aerospace titanium alloy gr5 sheet, China aerospace titanium alloy gr5 sheet manufacturers, suppliers, factory, Gr5 titanium welding wire, Gr12 pure titanium plate, thin titanium Gr5 sheet, cutting titanium sheet by hand, Gr9 Titanium Tube, titanium foil sheet