Robotics CNC Machined Parts

We manufacture precision CNC machined parts for industrial robots, collaborative robots, robotic arms, joints, end effectors, AGV/AMR systems, and automated equipment. From prototypes and low-volume orders to repeat production, we produce custom robotic components from your 2D drawings or 3D CAD files.

 

Key Capabilities:

CNC Turning, CNC Milling, 5-Axis Machining, Swiss CNC & Turn-Mill

Aluminum, Stainless Steel, Steel, Brass, Copper & Titanium

Tight dimensional and geometric tolerances for precision assemblies

Custom surface finishing, inspection and export packaging

Prototype, low-volume and repeat production

Upload CAD Files & Get a Quote

 

CNC Machining Process	Typical Robotics Parts	Key Advantages
CNC Turning	Shafts, Pins, Bushings, Spacers, Flanges	High dimensional accuracy for cylindrical parts
CNC Milling	Brackets, Mounting Plates, Housings, End-Effector Parts	Complex profiles, pockets and mounting features
5-Axis CNC Machining	Robot Joint Housings, Complex Brackets, End Effectors	Multi-sided machining with fewer setups
Swiss CNC Machining	Small Shafts, Pins, Bushings, Precision Connectors	High precision for small and slender components
CNC Turn-Mill	Shafts, Flanges, Coupling Components	Turning and milling in a single setup
CNC Grinding	Precision Shafts, Bearing Seats, Pins	Tight dimensional accuracy and fine surface finish
CNC Drilling & Tapping	Mounting Plates, Brackets, Housings	Accurate holes, threads and mounting patterns

Robotic components often combine tight fits, multiple mounting features and complex geometries. We select the appropriate CNC machining process based on part geometry, material, tolerance requirements and production volume to achieve consistent dimensional accuracy and reliable assembly performance.

 

Material	Common Grades	Typical Robotics Applications
Aluminum	6061-T6, 6082-T6, 7075-T6	Robot arms, brackets, housings, mounting plates
Stainless Steel	304, 316L, 17-4 PH	Shafts, joints, end effectors, housings
Carbon Steel	1018, 1045	Pins, shafts, brackets, structural components
Alloy Steel	4140, 4340	Drive shafts, pins, high-load joint components
Brass	C36000, C26000	Bushings, fittings, connectors, small precision parts
Bronze	C93200, C54400	Bushings, bearing components, wear parts
Copper	C11000, C14500	Electrical contacts, conductive components, heat-transfer parts
Titanium	Grade 2, Grade 5 (Ti-6Al-4V)	Lightweight structural parts, high-strength components

 

Material Selection for Robotics Parts

Lightweight robot arms: 6061-T6, 6082-T6, 7075-T6 Aluminum

High-load shafts and pins: 4140, 4340 Alloy Steel

Corrosion-resistant components: 316L, 17-4 PH Stainless Steel

Wear-resistant bushings: C93200 Bronze, C54400 Phosphor Bronze

Conductive components: C11000 Copper, C14500 Tellurium Copper

High strength-to-weight components: Grade 5 Titanium

 

Need a specific material grade? Send your drawing or CAD file with the required material specification for a machining review and quote.

 

Robotic components often require precise control of dimensions, hole positions, shaft fits, concentricity and mounting surfaces to ensure accurate assembly and reliable motion. We support tight tolerances for shafts, pins, bearing seats, housings, brackets and other precision robotic parts.

Specification	Typical Capability
Linear Tolerance	±0.01 mm
Precision Tolerance	±0.005 mm
Hole Diameter Tolerance	±0.01 mm
Shaft Diameter Tolerance	±0.01 mm
Hole Position	±0.01–0.03 mm
Concentricity	0.01–0.03 mm
Runout	0.01–0.03 mm
Flatness	0.01–0.03 mm
Parallelism	0.01–0.03 mm
Perpendicularity	0.01–0.03 mm
Surface Roughness	Ra 0.8–3.2 μm
Thread Accuracy	6H / 6g or specified thread class

 

Have a precision robotic component to manufacture? Send your 2D drawing or 3D CAD file for a tolerance and manufacturability review.

 

Surface finishing can improve wear resistance, corrosion protection, appearance and assembly performance of CNC machined robotic components. We offer multiple finishing options for robot arms, joints, housings, brackets, end effectors and precision motion parts.

Surface Finish	Typical Materials	Robotics Applications
Anodizing	Aluminum 6061-T6, 7075-T6	Robot arms, brackets, housings
Hard Anodizing	Aluminum 6061-T6, 7075-T6	Joint components, wear surfaces
Bead Blasting	Aluminum, Stainless Steel	Housings, covers, end effectors
Brushing	Aluminum, Stainless Steel	Covers, panels, visible components
Polishing	Stainless Steel, Aluminum, Brass	Precision and cosmetic components
Passivation	Stainless Steel 304, 316L, 17-4 PH	Shafts, joints, end effectors
Electroless Nickel Plating	Steel, Aluminum, Copper Alloys	Shafts, precision housings, wear parts
Black Oxide	Carbon Steel, Alloy Steel	Shafts, pins, mechanical components
Zinc Plating	Carbon Steel, Alloy Steel	Brackets, fastener-related components
Powder Coating	Aluminum, Steel	Robot frames, brackets, housings

 

Finish Options for Different Robotics Parts

Robot Arms & Brackets: Anodizing, Hard Anodizing, Powder Coating

Robot Joints & Shafts: Hard Anodizing, Electroless Nickel, Black Oxide, Passivation

End Effectors: Anodizing, Bead Blasting, Passivation

Housings & Covers: Anodizing, Bead Blasting, Brushing, Powder Coating

Bushings & Precision Parts: Polishing, Electroless Nickel Plating

 

We manufacture custom CNC machined components for different robotic systems, supporting motion, positioning, gripping, sensing and structural assemblies.

Robotics Application	Typical CNC Machined Components
Industrial Robots	Arm Links, Joint Housings, Shafts, Flanges, Mounting Plates
Collaborative Robots (Cobots)	Joint Parts, Lightweight Housings, Sensor Brackets, End-Effector Adapters
Robotic Arms	Arm Components, Bearing Seats, Shafts, Bushings, Structural Brackets
Robot Joints & Actuators	Joint Housings, Drive Shafts, Bearing Seats, Spacers, Flanges
Robotic End Effectors	Gripper Bodies, Fingers, Tooling Plates, Adapters, Mounting Brackets
AGV & AMR Robots	Wheel Hubs, Motor Mounts, Sensor Brackets, Shafts, Chassis Components
Pick-and-Place Systems	Mounting Plates, Guide Components, Shafts, Pins, Gripper Parts
Automated Production Equipment	Fixtures, Brackets, Housings, Connector Plates, Custom Mechanical Parts

 

Robotic joints and motion assemblies require precise control of shaft diameters, bearing bores, concentricity, runout and mounting interfaces. We CNC machine custom components for rotary joints, actuators and robotic motion systems.

Component	Typical Parts	Key Requirements
Joint Housings	Motor housings, bearing housings	Bore accuracy, concentricity, flatness
Drive Shafts	Servo shafts, output shafts	Diameter tolerance, runout, surface finish
Bearing Seats	Bearing bores, bearing carriers	Bore tolerance, roundness, concentricity
Bushings & Spacers	Sleeves, precision spacers	Dimensional accuracy, fit and wear resistance
Joint Flanges	Interface flanges, mounting flanges	Hole position, flatness, bolt patterns
Gear Housings	Gearbox housings, transmission covers	Positional accuracy, alignment, sealing surfaces
Actuator Components	Motor mounts, couplings, adapters	Concentricity, alignment and mounting accuracy

 

Key Machining Capabilities

CNC Turning for shafts, pins, bushings and cylindrical components

CNC Milling for housings, flanges and mounting features

5-Axis Machining for complex joint housings and multi-sided components

Grinding for precision shafts and bearing surfaces

CMM Inspection for critical dimensions, hole positions and geometric tolerances

 

Need precision robotic joint components? Send your CAD file or drawing for a machining review and quote.

 

 

Precision robotic components require consistent control of critical dimensions, hole positions, shaft fits, concentricity and geometric tolerances. Our inspection process covers incoming materials, in-process machining and final inspection.

Quality Control Item	Inspection Method / Equipment	Purpose
Dimensional Inspection	CMM, Micrometers, Calipers	Verify critical dimensions
Hole Diameter & Position	CMM, Bore Gauges, Pin Gauges	Control mounting and bearing holes
Shaft Diameter	Micrometers, CMM	Verify shaft fits
Concentricity & Runout	CMM, Dial Indicators	Control rotary components
Flatness & Parallelism	CMM, Surface Plate	Ensure accurate mating surfaces
Surface Roughness	Roughness Tester	Verify specified surface finish
Thread Inspection	Thread Gauges	Verify internal and external threads
Material Verification	Material Certificate / Spectrometer	Confirm material and grade
Final Inspection	CMM & Inspection Report	Verify parts before shipment

 

Quality Documentation

Inspection documentation can include:

Dimensional Inspection Reports

CMM Reports

Material Certificates

Surface Finish Reports

Final Inspection Records

Critical features such as bearing bores, shaft diameters, mounting-hole patterns, concentricity and runout can be specifically identified and inspected according to your drawings.

 

Need inspection for precision robotic parts? Send your drawings with the required tolerances and inspection specifications for review.

 

From a single prototype to repeat production, we provide CNC machining for robot development, functional testing, pilot builds and low-volume production. Parts are manufactured from your 2D drawings or 3D CAD files with the required materials, tolerances and surface finishes.

Production Stage	Typical Quantity	Suitable For
Prototype	1–10 pcs	Design verification, functional testing
Small Batch	10–100 pcs	Engineering validation, pilot builds
Low Volume	100–1,000 pcs	Pre-production and initial production
Repeat Production	1,000+ pcs	Ongoing robotic equipment production

 

Why Use CNC Machining for Robotics Prototypes?

Fast Design Iteration - Modify and produce new versions without tooling investment.

Functional Metal Parts - Test components using the same materials and finishes intended for production.

Complex Geometries - CNC milling, 5-axis machining and turning support intricate robotic components.

Consistent Repeatability - Maintain dimensional consistency from prototypes to production batches.

Flexible Quantities - Suitable for one-off prototypes as well as recurring low-volume orders.

 

We manufacture custom and OEM CNC machined parts for robotic arms, joints, actuators, end effectors, AGV/AMR systems and automation equipment. Parts are produced directly from your 2D drawings, 3D CAD files or samples.

Custom Capability	Details
Custom Dimensions	Parts manufactured to specified dimensions and tolerances
Material Selection	Aluminum, Stainless Steel, Steel, Brass, Bronze, Copper & Titanium
Complex Geometries	CNC milling, 5-axis machining, turning and turn-mill
Surface Finishing	Anodizing, plating, passivation, polishing, bead blasting and more
Inspection Requirements	CMM inspection, dimensional reports and material verification
Production Volume	Prototype, low-volume and repeat production
Custom Packaging	Individual protection, partitioned packaging and export packing

 

CAD Files & Drawings We Accept

STEP / STP

IGES / IGS

DXF

DWG

PDF Technical Drawings

Other common 2D/3D CAD formats

 

Have an OEM robotics part to manufacture? Upload your CAD file or drawing to get a custom CNC machining quote.

 

Packaging Option	Application
PE Bags / Protective Film	Protect machined surfaces from scratches and dust
Foam Inserts	Individual protection for precision components
Partitioned Cartons	Separate multiple small parts and prevent collision
Custom Trays	Organize pins, bushings and precision components
Export Cartons	Secure packaging for standard shipments
Wooden Cases / Pallets	Heavy, large or bulk robotic components

 

Typical Lead Times

Order Type	Typical Lead Time
Prototype	5–10 working days
Small Batch	7–15 working days
Low-Volume Production	10–20 working days
Repeat Production	10–25 working days

 

Need a specific delivery schedule? Send your drawings, quantities and required delivery date for a production and lead-time assessment. 

 

1. What types of robotic parts can you CNC machine?

We manufacture robotic arm components, joint housings, shafts, pins, bushings, spacers, flanges, mounting brackets, end-effector components, housings and custom motion components.

 

2. What materials can you use for robotics CNC parts?

Common materials include 6061-T6, 7075-T6, 6082-T6 aluminum, 304 and 316L stainless steel, 4140 and 4340 alloy steel, C36000 brass, C93200 bronze, C11000 copper and Ti-6Al-4V Grade 5 titanium.

 

3. What CNC machining processes do you offer for robotic components?

We offer CNC turning, CNC milling, 5-axis machining, Swiss CNC machining, CNC turn-mill and grinding for different robotic component geometries.

 

4. What tolerances can you achieve?

Typical CNC machining tolerances can reach ±0.01 mm, with precision features down to approximately ±0.005 mm depending on part geometry, material, size and machining process.

 

5. Can you machine robotic joint components?

Yes. We manufacture joint housings, bearing seats, drive shafts, flanges, bushings, spacers and actuator components, with control of critical features such as bore diameter, concentricity and runout.

 

6. Can you manufacture parts from 3D CAD files?

Yes. We can manufacture parts from STEP, STP, IGES, IGS, DXF, DWG and PDF technical drawings.

 

7. Do you support robotics prototypes and low-volume production?

Yes. We support single prototypes, small batches, low-volume production and repeat orders, making CNC machining suitable for robotics development and pilot production.

 

8. Can you provide inspection reports?

Yes. Depending on project requirements, we can provide dimensional inspection reports, CMM reports, material certificates and other quality documentation.

 

9. What surface finishes are available?

Available finishes include anodizing, hard anodizing, bead blasting, polishing, brushing, passivation, electroless nickel plating, black oxide, zinc plating and powder coating.

 

10. Can you manufacture custom OEM robotic components?

Yes. We manufacture custom OEM parts according to your drawings, CAD files, material specifications, tolerances and surface finishing requirements.

 

11. What is the typical lead time for robotics CNC parts?

Typical lead times are 5–10 working days for prototypes, 7–15 working days for small batches and 10–25 working days for repeat production, depending on complexity, quantity and finishing requirements.

 

12. How do I get a quote for custom robotics CNC parts?

Send us your 2D drawing or 3D CAD file, material, quantity and required surface finish. Our team will review the requirements and provide a machining quotation.

Hot Tags: robotics cnc machined parts, China robotics cnc machined parts manufacturers, suppliers, factory, titanium