GR5 products provided by GNEE
Schedule Chart of Ti Alloy Grade 5 Pipe
|
1/8" IPS(.405"O. D.) |
3 1/2" IPS( 4.000"O. D.) |
|---|---|
|
SCH 40, 80 |
SCH 10, 40, 80, 160, XXH |
|
1/4" IPS(.540"O. D.) |
4" IPS(4.500"O. D.) |
|
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
|
3/8" IPS(.675"O. D.) |
5" IPS( 5.563"O. D.) |
|
SCH 10, 40, 80 |
SCH 10, 40, 80, 160, XXH |
|
1/2" IPS(.840"O. D.) |
6" IPS(6.625"O. D.) |
|
SCH 5, 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
|
3/4" IPS(1.050"O. D.) |
8 " IPS(8.625"O. D.) |
|
SCH 10, 40, 80, 160, XXH |
SCH 5, 10, 40, 80, 120, 160, XXH |
|
1" IPS:(1.315′O. D.) |
10" IPS(10.750"O. D.) |
|
SCH 5, 10, 40, 80, 160, XXH |
SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
|
1-1/4" IPS(1.660"O. D.) |
12" IPS(12.750"O. D.) |
|
SCH 10, 40, 80, 160, XXH |
SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
|
1-1/2" IPS(1.900"O. D.) |
14" IPS(14.000"O. D.) |
|
SCH 10, 40, 80, 160, XXH |
SCH10 (.188), SCH40 (.375) |
|
2" IPS(2.375"O. D.) |
16" IPS(16.000"O. D.) |
|
SCH 10, 40, 80, 160, XXH |
SCH10(.188), SCH40(.375) |
|
2 1/2" IPS(2.875"O. D.) |
18" IPS (18.000"O. D.) |
|
SCH 10, 40, 80, 160, XXH |
SCH-40 (.375) |
|
3" IPS( 3.500"O. D.) |
|
|
SCH 5, 10, 40, 80, 160, XXH |
Chemical Composition of Grade 5 Titanium pipe
| Titanium Gr 5 | C | Ti | N | Fe | H | O | V | Al |
| 0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
UNS R56400 Pipe Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 128000 , MPa – 880 | Psi – 138000 , MPa – 950 | 14 % |
Titanium Grade 5 Pipe Equivalent Grade
| STANDARD | UNS | WERKSTOFF NR. |
| Titanium Gr 5 | R56400 | 3.7165 |
Out Diameter of Ti Alloy Grade 5 Welded Pipe
| Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8" ~ 8" | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Grade 5 Titanium Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Grade 5 Titanium Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Uns R56400 Erw Pipe Stock List
| Standard | Pipe size | O.D. | I.D. | Wall Thickness |
|---|---|---|---|---|
| Schedule 5 | 0.75 inches19.05 mm | 1.05 inches26.67 mm | 0.920 inches23.368 mm | 0.065 inches1.6510 mm |
| Schedule 5 | 1 inches25.4 mm | 1.315 inches33.401 mm | 1.185 inches30.099 mm | 0.065 inches1.6510 mm |
| Schedule 5 | 1.25 inches31.75 mm | 1.66 inches42.164 mm | 1.530 inches38.862 mm | 0.065 inches1.6510 mm |
| Schedule 5 | 1.5 inches38.1 mm | 1.9 inches48.26 mm | 1.770 inches44.958 mm | 0.065 inches1.6510 mm |
| Schedule 5 | 2 inches50.8 mm | 2.375 inches60.325 mm | 2.245 inches57.023 mm | 0.065 inches1.6510 mm |
| Schedule 5 | 2.5 inches63.5 mm | 2.875 inches73.025 mm | 2.709 inches68.8086 mm | 0.083 inches2.1082 mm |
| Schedule 5 | 3 inches76.2 mm | 3 1/2 inches88.90 mm | 3.334 inches84.6836 mm | 0.083 inches2.1082 mm |
| Schedule 5 | 3.5 inches88.9 mm | 4 inches101.6 mm | 3.834 inches97.3836 mm | 0.083 inches2.1082 mm |
| Schedule 5 | 4 inches101.6 mm | 4.500 inches114.3 mm | 4.334 inches110.0836 mm | 0.083 inches2.1082 mm |
| Schedule 5 | 6 inches152.4 mm | 6.625 inches168.275 mm | 6.407 inches162.7378 mm | 0.109 inches2.7686 mm |
| Schedule 5 | 8.00 inches203.2 mm | 8.625 inches219.075 mm | 8.407 inches213.5378 mm | 0.109 inches2.7686 mm |
| Schedule 5 | 10.00 inches254 mm | 10.75 inches273.05 mm | 10.482 inches266.2428 mm | 0.134 inches3.4036 mm |
| Schedule 5 | 12.00 inches304.8 mm | 12.75 inches323.85 mm | 12.420 inches315.468 mm | 0.165 inches4.191 mm |
| Schedule 10 | 0.75 inches19.05 mm | 1.05 inches26.67 mm | 0.884 inches22.4536 mm | 0.083 inches2.1082 mm |
| Schedule 10 | 1 inches25.4 mm | 1.315 inches33.401 mm | 1.097 inches27.8638 mm | 0.109 inches2.7686 mm |
| Schedule 10 | 1.25 inches31.75 mm | 1.66 inches42.164 mm | 1.530 inches38.862 mm | 0.109 inches2.7686 mm |
| Schedule 10 | 1.5 inches38.1 mm | 1.9 inches48.26 mm | 1.770 inches44.958 mm | 0.109 inches2.7686 mm |
| Schedule 10 | 2 inches50.8 mm | 2.375 inches60.325 mm | 2.157 inches54.7878 mm | 0.109 inches2.7686 mm |
| Schedule 10 | 2.5 inches63.5 mm | 2.875 inches73.025 mm | 2.635 inches66.929 mm | 0.12 inches3.0480 mm |
| Schedule 10 | 3 inches76.2 mm | 3 1/2 inches88.90 mm | 3.260 inches82.804 mm | 0.12 inches3.0480 mm |
| Schedule 10 | 3.5 inches88.9 mm | 4 inches101.6 mm | 3.760 inches95.504 mm | 0.12 inches3.0480 mm |
| Schedule 10 | 4 inches101.6 mm | 4.500 inches114.3 mm | 4.260 inches108.204 mm | 0.12 inches3.0480 mm |
| Schedule 10 | 6 inches152.4 mm | 6.625 inches168.275 mm | 6.357 inches161.4678 mm | 0.134 inches3.4036 mm |
| Schedule 10 | 8.00 inches203.2 mm | 8.625 inches219.075 mm | 8.329 inches211.5566 mm | 0.148 inches3.7592 mm |
| Schedule 10 | 10.00 inches254 mm | 10.75 inches273.05 mm | 10.420 inches264.668 mm | 0.160 inches4.064 mm |
Surface Finish of Ti Alloy Grade 5 Welded pipe
| Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
| BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
Titanium Grade 5 Pipe Characteristics
Good Fabricability
Good Ductility
High Strength Titanium
Good Weldability
Heat Treatable
Application of DIN 3.7165 Hollow Pipe
Petroleum Refining - recuperators, catalytic recovery systems
Pipe Line for Gas & Water
Petrochemicals and Refineries
Pipes for Engineering purpose
Paper Mill Equipment
Oil & Gas Exploration
Thermal, Nuclear and Solar Power Plants
Power Generation - tube hangers, pulverized coal burners
Titanium products provided by GNEE
|
Grade |
TA1 TA2 TC4 TA9-1 TA18 Gr1 Gr2 GR5 Gr7 GR 9 Gr11 Gr12 |
|
size |
OD. 6mm~13mm Max Length 4m OD.13mm~114.3mm, Max Length 15m WT.0.3mm~12mm |
|
Standard |
GB/T3624 GB/T3625 ASTM B337 B338 B861 B862 ASME SB338 ASME SB337 ASME SB861 SB862 |
|
Dimension (MM) |
Size Range: Φ10-Φ168 x0.5-10x 100-18000 MM Φ 5/8"xBWG20*L |
|
Application |
heat exchanger and Condenser; U Type coil pipe ; Petroleum pipeline ; Sea farming; Evaporator; Fluid Transportation Piping etc. |
|
Inspection Equipment |
100% Nondestructive Tester; UT Testing Detector; Tensile Tester Digital Ultrasonic Detector; Infrared Tester; HV Hardness Tester |
|
Product name |
Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy rod |
|
Standard |
ASTM B348/ASTM F136/ASTM F67/AMS 4928/AMS 4965L |
|
Grade |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 |
|
Diameter |
6-500mm,customizable |
|
Length |
Max6000mm |
|
Supply state |
Hot working state, Cold working state, Annealed state, Solid solution state |
|
Surface |
Acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
|
Item |
Titanium plate,Titanium sheet |
|
Grade |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23,etc. |
|
Size |
0.3-80mm≤300-1500mm≤12000mm or customizable |
|
Standard |
ASTM B265,ASTM F136,AMS 4900,AMS 4901,AMS 4911,AMS 4919,
AMS 4914 |
|
MOQ |
10kg |
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|
Application |
Industrial, Aerospace, Petrochemical, Medical etc. |
|
Feature |
High strength, Corrosion resistance, High performance |
|
Technics |
Hot rolled, Cold Rolled |
|
Surface |
Bright, Polished, Pickling, Sandblasting |
|
Processing Service |
Bending, Welding, Decoiling, Cutting, Punching |
|
Package |
Wooden Box |
|
Product Name
|
Polished 1mm 1.5mm 2mm 3mm Nitinol Shape Memory Straight Wire Nickel Titanium Wire for Medical
|
|
Material Type
|
NiTiCu NiTi, Fe NiTi
|
|
|
Room Temperature(0C - 15C)
Low temperature (Below 0C) High temperature(40C - 120C) |
|
Feature
|
Superelastic or Shape memory
|
|
Standard
|
ASTM F2603-18/12
|
|
Surface
|
Natural Oxide, Pickled/Etched, Centerless Ground and Mechanically-cleaned
|
|
Condition
|
As Cold-Worked, Straight Strain Annealed and Shape Set Annealed.
|
|
Certificate
|
Transformed Temperatures, Tensile Properties, Chemical Composition and Customer Specific Requirements
|
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
|
1. Medical field : with very good biocompatibility with human body, medical nitinol wire can be used in medical field.
2. Eye glasses manufacturer : Low density, high toughness, high stability, biocompability with human boday, nickel titanium
alloy wire is becoming more popular between eye glasses manufacturers. 3. Fishing wire: nickel titanium alloy wire now is widely used as fishign wire because of its high strenght and very good memorability and superelastic. |
