GR1 products provided by GNEE
Products Description
Titanium welded pipe, also known as welded titanium pipe, is made of titanium or titanium after welding through the formation of pipe. Welded pipe production technology is simple, high production efficiency, varieties and specifications, equipment investment is less, but the general strength is lower than seamless titanium pipe. We supply Titanium welded tube with standard ASTM B862 and ASTM 4942, the titanium tube can be widely used for chemical industry and seawater desalination application etc.
We supply type: Titanium tube of round tube, square tube, coiling tube, more over, we could customize the titanium tube according to our clients' request.
Materials and standard of titanium welded tube
|
Item |
Titanium & Titanium alloy tube |
|
| Standard | ASTM B862, ASTM B337, ASTM B338 and ASTM 4942 | |
|
Condition |
(M) |
|
|
Shape |
Round, square, coiling |
|
|
Specification |
Outside diameter: 19mm Thickness: 0.5mm~ 0.7mm |
Length:1000~15000mm |
|
outside diameter：25.4mm Thickness：0.5mm~0.7mm |
Length:1000~15000mm | |
|
It can be customized according to our clients' requirements |
||
|
Material |
Pure titanium |
Gr.1,Gr.2 |
|
|
Alloy titanium |
Gr.5(Ti-6Al4V), Gr.7(Ti-0.2Pd), Gr.9(Ti-3Al2.5V), Gr.12(Ti-0.3Mo-0.8Ni) |
|
Surface |
Pickling or Bright |
|
|
Processing technology |
Hot forging, hot rolled, cold rolled |
|
Features of titanium welded tube
The straight welded pipe production technology is simple, the production efficiency is high, the cost is low, and the development is faster. The strength of spiral welded pipe is generally higher than that of longitudinal-welded pipe. The welded pipe with larger diameter can be produced with narrower billet, and the welded pipe with different diameters can be produced with the same width of billet.
titanium welded tube process
The raw materials - Flat - end uncoiling shearing and welding - Welding - - loop forming - both inside and outside the weld bead removal pre correction - induction heat treatment, sizing and alignment: eddy current testing - cut - pressure check final inspection, packing, pickling and shipment.
Application of the titanium welded tube
Products are widely used in water engineering, petrochemical industry, chemical industry, power industry, agricultural irrigation and urban construction
For liquid transportation: water supply and drainage.
For gas delivery: gas, steam, liquefied petroleum gas.
For structural purposes: used as piling pipes, bridges, piers, roads, building structures, pipes, etc.
Titanium products provided by GNEE
|
Name |
Titanium Tube & Pipe |
|||
|
Material |
Pure Titanium/ Titanium Alloy |
|||
|
Standard |
GB/T 3624,GB/T 3625,GB/T 26057
ASTM B337,ASTM B338,ASTM B861,ASTM B862 JIS H 4630 |
|||
|
Common Grade |
National standard grades: TA1, TA2, TC4, TA9, TA18, TA10 |
|||
|
|
Length: 50-6000mm or according to customer requirements |
|||
|
Outer diameter: 3-300mm or according to customer requirements |
||||
|
Wall thickness: 0.2-5.5mm or according to customer requirements |
||||
|
Section shape |
Round / Square/Oval/Spiral/Bar |
|||
|
Surface |
Bright annealing, Pickling,Polishing |
|||
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
|
|
Standard
|
ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4928 etc
|
|
Shape
|
Titanium round rod/bar, Titanium square rod/bar,Titanium flat rod/bar
Titanium rectangle rod/bar, Titanium hex rod/bar |
|
Diameter
|
1-300mm,customizable
|
|
Length
|
50mm-6000mm,customizable
|
|
Tolerance
|
h6~h13 H10~H13
|
|
Surface
|
Bright/Polished/ Machined
|
|
Main Technique
|
Hot Forged; Hot Rolled; Cold drawn; Straighten etc
|
|
Heat Treatment
|
Usually are Annealled,but Solid Solution & Aging can be also OK
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical, aerospace, etc.
|
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23/Ti-15333 etc
|
|
Standard
|
ASTM B265/ASME SB265, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4911 etc
|
|
Shape
|
Titanium foil strip/Titanium sheets plate/Titanium coil
|
|
Thickness
|
0.02mm~100mm
|
|
Width
|
10-3000mm,customizable
|
|
Length
|
Customizable
|
|
Surface
|
Pickled/Sandblasting/Polishing
|
|
Main Technique
|
Hot Rolled /Cold Rolled
|
|
Heat Treatment
|
Usually are Annealled,but Solid Solution & Aging can be also OK
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical,aerospace, etc.
|
|
Product Name |
Titanium Wire |
|
Diameter |
0.2-6.0Mm or as required |
|
Standard |
AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc |
|
Application |
welding |
|
Surface |
Bright or black and painting according to customer requirement |
|
Thickness Tolerance |
±0.01mm |
|
Model Number |
Gr1, Gr2...Gr12 |
|
MOQ |
100kgs.We also can accept sample order. |
|
Shipment Time |
Within 3-5 workdays after receiving deposit or L/C |
|
Export Packing |
Waterproof paper, and steel strip packed. |
|
Capacity |
250,00 tons/year |
