Different Grades of Titanium and Titanium Based Alloys

Titanium Grade 7 possesses physical and mechanical properties equivalent to those of CP3 titanium or Grade 2. It has very good welding and fabricating properties and is highly resistant to corrosion, especially from reducing acids.

Applications

Chemical Processing, Power Generation, Desalination

Standards

ASME SB-381, ASME SB-337, ASME SB-265, ASME SB-363, ASME SB-337, ASME SB-348, ASME SB-338, ASME SB-338

Forms Available

Bar, Plate, Forgings, Sheet, Welding Wire, Tube, Wire

Titanium Grade 11 is extremely resistant to corrosion. It has similar mechanical and physical properties to those of Titanium CP Grade 2.

Applications

Chemical processing, Industrial, Desalination Power generation,

Standards
ASME SB-338

Forms Available

Tube

Titanium Grade 5 alloy is the most commercially available titanium alloy. It offers a very good combination of toughness and high strength. Grade 5 titanium has good fabrication and welding characteristics.

Applications

Aerospace, Marine, Chemical Processing, Medical

Standards

ASME SB-265,ASME SB-348, AMS 4911, AMS 4928, AMS 4967, AMS 4965

Titanium Grade 6 alloy hasgood stability weldability,and strength in elevated temperatures.

Applications

Aerospace

Standards

ASME SB-381, MIL-T-9046, AMS 4966, ASME SB-348,MIL-T-9047, AMS 4956, ASME SB-265, AMS 4976, AMS 4926, AMS 4910,

Forms Available

Bar, Sheet, Forgings Plate, Wire

Titanium Grade 9 has medium strength that lies between Grade 4 and Grade 5. It has very good corrosion resistance and is widely used in industrial andaerospace applications. Grade 9 titanium can be used in higher temperatures than Grades 1, 2, 3 and 4. Grade 9 titanium has excellent cold rolling properties.

Applications

Aerospace, Chemical processing, Automotive, Medical, Consumer applications, Marine, Transportation

Standards

AMS 4944,AMS 4943, ASME SB-338

Forms Available

Bar, Plate, Forgings, Wire, Sheet,

Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.8% of nickel and 0.3% of molybdenum. This provides enhanced corrosion resistance.

Applications

Chemical processing, Power generation, Desalination, Industrial

Standards

ASME SB-338

Forms Available

Tube

Titanium Grade 19 can be heat treated and has extremely high strength. It provides very good resistance to corrosion and stress.

Applications

Automobile, Aerospace

Standards

MIL-T-9046, ASME SB-348, MIL-T-9047, AMS 4958, AMS 4957, ASME SB-265

Titanium Grade 23 is similar to Titanium Grade. But it contains lower amount of oxygen, iron and nitrogen.And it has better fracture toughness and ductility than those of Titanium Grade 5.

Applications

Aerospace, Marine, Chemical Processing, Medical

Standards

AMS 4911, AMS 4930, AMS 4928, AMS 4931, AMS 4965, AMS 4935, AMS 4967, MIL -T-9046, AMS 4991, AMS 4985, MIL -T-9047, BSTA 10,11 and 12, DIN 3.7165, BSTA 28,56 and 59, AMS 4907 ELI, AMS 4956 ELI , AMS 4930 ELI, UNS R56407, ASTM F136 ELI

Forms Available

Bar, Plate, Forgings, Welding Wire, Sheet, Wire

Titanium 6-2-4-2 has impressivestability, strength, and creep resistance to temperatures as high as 550 °C.

Applications

Gas, Engine afterburner ,Turbine Compressor, Aerospace

Standards

AMS 4919, AMS 4975, AMS 4952, DIN 3.7164, GE B50TF21, GE B50 TF22, GE B50TF22, MIL F-83142, GE C50TF7, MIL T-9046, MIL T-9047, UNS R54620, PWA 1220

Forms Available

Bar, Sheet , Plate

Titanium 6Al-6V-2Sn is an Alpha Beta two-phase alloy. It is often used in aged, annealed, or solution treated conditions. It's a high strength heat treatable alloy with lower ductility and toughness than Titanium Grade 5 (6Al-4V) and it's difficult to weld. Cold forming of Titanium 6Al-6V-2Sn is difficult due to its large amount of spring-back and high strength. This grade of titanium can be welded by the inert gas but the heat-affected area will have less toughness and ductility than the parent material. The hardness of Titanium 6-6-2 is roughly Rockwell C 36-38. This grade of titanium is mainly used for rocket engine cases, airframe and jet engine parts, and ordinance components. Please make a call to us to determine our minimum item quantity.

Applications

Airframe Components, Ordinance Components, Jet Engine Parts, Rocket Engine Cases

Standards

MIL-T-9047, AMS 4981

Forms Available

Bar, Sheet, Wire, Plate, Fittings, Forgings, Seamless Pipe,Flanges, Seamless Tube, Welded Tube, Welded Pipe

Titanium 6Al-2Sn-4Zr-6Mo is an Alpha-Beta Alloy. It's usually considered the workhorse alloy of the titanium industry. The alloy is fully heat-treatable in section whose size is up to one inch and is used up to approximately 400°C (750°F). Due to the fact that it is one of the most commonly used alloys (over 70% of all melted alloy grades are a sub-grade of Ti-6-4,) its use spans many airframe components and aerospace engine. Titanium 6Al-2Sn-4Zr-6Mo is also applied in many non-aerospace occasions, such as offshore, marine, and power generation industries. This Alpha-Beta alloy combines good strength and corrosion resistance with fabricability and weldability. The alloy is usually available in the form of bar and it's generally used in deep sour well. This kind of alloy can be cold or hot formed. Please make a call to us to determine our minimum item quantity.

Applications

Aerospace Engines, Marine Applications, Airframe Components, Power Generation Applications, Offshore Applications

Standards

AMS 4981

Forms Available

Bar, Sheet, Plate

Contact now

Founded as a leading specialist in the global titanium industry, our company excels in the export and supply of premium titanium products for a diverse range of international applications. We are dedicated to providing high-performance materials that meet the stringent demands of sectors such as aerospace, chemical processing, marine, medical, and automotive engineering.

Our core expertise lies in our comprehensive portfolio of titanium mill products. We supply precision titanium tubes and titanium pipes for critical heat transfer and piping systems. Our inventory includes robust titanium plates, titanium sheets, and titanium slabs for structural and industrial fabrication. For machining and component manufacturing, we offer a full spectrum of titanium rods, titanium bars, titanium billets, and titanium wires. Additionally, we provide fine titanium coils and ultra-thin titanium foil for specialized technological and industrial uses.