Sep 03, 2025 Leave a message

Thermal Expansion and Yield Analysis of TA18 Titanium Alloy

Alloy Identity of TA18

TA18 is the Chinese designation for the titanium alloy Ti-3Al-2.5V, which corresponds to ASTM Grade 9 with UNS designation R56320. Aluminium stabilises the alpha phase and raises strength, while vanadium stabilises the beta phase and preserves ductility and formability.

The alloy was developed as a medium-strength, weldable material for hydraulic and instrumentation tubing, and it is now one of the most widely used titanium alloys for thin-wall tube applications.

Thermal Expansion Behaviour

The coefficient of thermal expansion of TA18 is about 9 x 10-6 per degree Celsius at room temperature, which is roughly half that of steel and similar to other titanium alloys. The value rises gradually with temperature, and the total expansion over a service range must be accounted for in tube system design.

The low expansion coefficient is one reason titanium tubing is used in precision systems. Pipework stays dimensionally stable as temperature changes, which reduces movement at fittings and limits thermal stress in rigidly mounted lines.

Yield Strength in the Annealed Condition

In the annealed condition, TA18 develops a minimum yield strength of about 483 MPa and a minimum tensile strength of about 620 MPa, roughly double the yield strength of Grade 2 titanium. This strength allows thin-wall tubing to carry high hydraulic pressure with little weight.

The alloy achieves this strength while remaining formable, and it can be bent, flared and swaged to the tight tolerances required for aircraft hydraulic lines.

Yield Behaviour at Elevated Temperature

As with all titanium alloys, the yield strength of TA18 falls as temperature rises, and the reduction must be considered where tubing operates near hot engine bays. At temperatures up to about 150 degrees Celsius the loss is small, and the alloy retains most of its room-temperature capability.

Above this range, design allowables are reduced, and the creep resistance of the alloy limits the maximum continuous service temperature of thin-wall tubing.

Design Consequences for Hydraulic Tubing

The combination of low thermal expansion and high yield strength makes TA18 ideal for aerospace hydraulic systems, where lines carry high-pressure fluid through large temperature swings. Thin-wall tubing keeps weight low while the strength provides the pressure rating.

The alloy also resists the pitting and crevice attack that can affect other tube materials in humid and salty environments, which extends the life of the complete hydraulic system.

Frequently Asked Questions

Q: What is the composition of TA18?

A: TA18 is Ti-3Al-2.5V, equivalent to ASTM Grade 9 with UNS designation R56320.

Q: What is the coefficient of thermal expansion of TA18?

A: The coefficient is about 9 x 10-6 per degree Celsius at room temperature, roughly half that of steel.

Q: What is the yield strength of TA18?

A: In the annealed condition the minimum yield strength is about 483 MPa, with a minimum tensile strength of about 620 MPa.

Q: Why is TA18 used for hydraulic tubing?

A: It combines high yield strength with low thermal expansion and corrosion resistance, allowing light thin-wall lines for high-pressure service.

Q: Can TA18 tube be formed?

A: Yes, the alloy bends, flares and swages well despite its higher strength.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry