Comprehensive Analysis of TC11 Titanium Tubes - Knowledge

Products Description

Composition and Microstructure Characteristics

Chemical Composition: The nominal composition of TC11 titanium alloy is Ti-6.5Al-3.5Mo-1.5Zr-0.3Si, primarily consisting of titanium (Ti), aluminum (Al), molybdenum (Mo), zirconium (Zr), and silicon (Si). The aluminum content ranges from 5.5% to 7.0%, the molybdenum content from 2.8% to 3.8%, the zirconium content from 0.8% to 2.0%, and the silicon content from 0.2% to 0.35%.
Microstructure Characteristics: TC11 titanium alloy is a typical α+β titanium alloy, with both α and β phases coexisting in its microstructure. The α phase imparts high strength and heat resistance to the alloy, while the β phase improves its plasticity and toughness. This optimal combination of phases gives TC11 titanium alloy excellent overall performance.

Performance Characteristics

1. Mechanical Properties
High Strength: TC11 titanium tubes have high room-temperature strength, typically exceeding 900 MPa in tensile strength and 800 MPa in yield strength, enabling them to withstand heavy loads.
Good Toughness: While maintaining high strength, TC11 titanium tubes also possess good toughness, making them less susceptible to brittle fracture.
Excellent Fatigue Resistance: With appropriate heat treatment and processing, TC11 titanium tubes exhibit excellent fatigue resistance.
Heat Resistance: Below 500°C, TC11 titanium alloy exhibits excellent thermal properties, such as high-temperature strength and creep resistance.
Corrosion Resistance: TC11 titanium tubes exhibit excellent corrosion resistance in many corrosive media, including seawater, moist chlorine gas, and oxidizing acids.

2. Processability
Excellent Hot Workability: Tubes can be formed using hot working methods such as hot extrusion and hot rolling.
Good Weldability: A variety of welding methods are available, and the strength of the welded joints approaches that of the base metal. Acceptable Machinability: With appropriate tool selection and processing parameters, turning, milling, drilling, and other machining operations are possible.

Production Process

1. Melting: Advanced technologies such as vacuum consumable arc melting or electron beam melting are used to ensure uniformity and high purity of the alloy composition.
2. Forging: The melted ingot is heated to the appropriate temperature and forged to improve the alloy structure.
3. Extrusion: TC11 titanium tubes are produced in various specifications through extrusion, achieving excellent dimensional accuracy and surface quality.
4. Heat Treatment: Depending on the application requirements, the tubes are heat treated, such as annealing, to stabilize the structure and performance.

Applications

1. Aerospace: TC11 titanium tubes are commonly used in the manufacture of key components in aircraft engines, such as compressor disks, blades, and drums.
2. Chemical Industry: They can be used to manufacture piping and components for chemical reactors, distillation towers, and crystallization equipment. 3. Metallurgical Industry: TC11 titanium tubes can extend the service life and efficiency of metallurgical equipment such as crushers and gear roller assemblies.
4. Marine Engineering: They are used in the manufacture of components for desalination equipment, marine aquaculture equipment, and submarine pipelines, protecting them from seawater corrosion.

In summary, TC11 titanium tubes, with their excellent composition and microstructure, performance characteristics, processing capabilities, and wide range of applications, play an important role in a variety of fields, including aerospace, chemical engineering, metallurgy, and marine engineering.

Titanium specifications provided by GNEE

CNC machined parts

Type	Drilling, Etching,Chemical Machining, Laser MachiningMilling, Other Machining Service, Turning, Wire EDM,Rapid Prototyping
Material	Titanium,Aluminum, Brass, Bronze, Copper, Hardened Metal, Pre-cious Metal, Stainless Steel, Steel Alloy
Process	CNC Machining,CNC Turning, CNC Milling, CNC Boring,CNC Grinding,CNC Drilling
Surface Treatment	Anodizing,Plating,Polishing,Sandblasting,Laser Engraving,Oxide Black,Nickel Plating,Chrome Plat Or Customer's Requirements
Tolerance	+/-0.01mm
Lead Time	Sample: 7 days
Mass Production	2-3 weeks
Package	Standard Carton Or Plastic Tray, Sponge Tray, CardboardTray, etc., Can Be Customized According To CustomerRequirements
Application	Appliance,Auto, Building, Capital equipment, Energy,Instrumentation,Medical device.Telecommunications

Titanium tube

Material	Pure Titanium/ Titanium Alloy
Standard	GB/T 3624,GB/T 3625,GB/T 26057 ASTM B337,ASTM B338,ASTM B861,ASTM B862 JIS H 4630
Common Grade	National standard grades: TA1, TA2, TC4, TA9, TA18, TA10 American standard grades: GR1, GR2, GR5, GR7, GR9, GR12
Size	Length: 50-6000mm or according to customer requirements
	Outer diameter: 6-80mm or according to customer requirements
	Wall thickness: 0.35-10mm or according to customer requirements
Production Process	Welding or Seamless
Section shape	Round and others
Surface	Bright annealing, Pickling,Polishing
Packing	Coil or straight length by boxes

Titanium rod

item	Titanium Bars /Titanium Rod
Standard	GB/T2965-2007,JIS H4650-2001,ASTM B348-06,DIN17862-93, ASTM F136,AMS4928,GB/T13810,Q/BS5331-91,etc
Grade	TA1,TA2,TA3,TA7,TA9,TA10,TC4,TC4ELI,TC6,TC9,TC10,TC11, GR1,GR2,GR3,GR5,GR7,GR12
Diameter	1-500mm
Length	1-12m
Surface	Black,polish,brush,hair line,etc
Package	Standard export package ,by wooden box ,or as required
Application	Titanium bar Is mainly used in machinery and equipment, electroplate equipment, medical and all kinds of precision parts and other industries

Titanium Sheet/Coil

Titanium Plate and sheet Type	Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Grade	Gr1 Gr2 Gr3 Gr4 Gr7 Gr9 Gr12 ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS
Titanium Alloy Plate Length	1000mm-13000mm or as required
Titanium Plate Width	1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required
UNS Plate Thickness	0.3 to 120mm or as required
ASTM B265 Titanium Alloy Plate Process	Hot/ Cold Rolled/forging
Titanium Sheet ASTM	ASTM B265
Titanium Sheet AMS	AMS 4902
Tolerances of width and thickness	EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy strip for springs,EN 10088 ASTM B265 Titanium Alloy strip (general)
Cp Titanium Plate standards and approvals	EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID
Standard Plate & Sheet Sizes	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
	Cold rolled Titanium Plate 0.5-6.4 mm
	Hot rolled Titanium Plate 3.0–60.0 mm
UNS Plate Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Sheet suppliers
Availability of Titanium Alloy Foil sizes	Thickness : 8-100 microns (0.00031-0.004 in)
	Width: Up to 500 mm (19.5 in)
	Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Cutting	To provide a comprehensive service, we use a variety of cutting methods, including:
Plasma profiles	As per customer's drawings
Value added services for Cp Titanium Plate	Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
China Titanium Plate Manufacturer	ASTM B265 Titanium Alloy Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width; Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Clad plate: Alloy Titanium Clad plate is a composite steel plate made by bonding UNS Titanium Plate, etc.ASTM B265 Titanium Alloy Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width.
UNS Plate Origin	CHINA
Packing of DIN plate	Bundles with waterproof cloth outside or plywood box
Test	UT, SGS testing, TUV etc

titanium wire

Product Name	Factory direct titanium wire pure titanium alloy wire special specifications can be sold
Material	Pure titanium and Titanium alloy
Titanium Grade	GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23 ERTi-1/ERTi-2/ERTi-3/ERTi-4/ERTi-5Eli/ERTi-7/ERTi-9/ERTi-11/ERTi-12 Ti15333/Nitinol Alloy
Standard	AWS A5.16/ASTM B863/ASME SB863, ASTMF67, ASTM F136, ISO-5832-2(3) etc
Shape	Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire
Wire Gauge	Dia(0.06--6) *L
Process	Bar billets-hot rolling-drawing-annealing-strength-pickling
Surface	Polishing, picking, acid washed, black oxide
Main Technique	Hot Forged; Hot Rolled; Cold drawn; Straighten etc
Material Milling Certificate	According to. EN 10204.3.1 Including Chemical composition and Mechanical property
Application	Welding, Industry, Medical, Aerospace, Electronic etc

about Us

The company boasts leading domestic titanium processing production lines, including:

German-imported precision titanium tube production line (annual production capacity: 30,000 tons);

Japanese-technology titanium foil rolling line (thinnest to 6μm);

Fully automated titanium rod continuous extrusion line;

Intelligent titanium plate and strip finishing mill;

The MES system enables digital control and management of the entire production process, achieving product dimensional accuracy of ±0.01μm.

E-mail

sale@gneemetal.com