Titanium Grade 2
Titanium grade two is extremely versatile and can be used in a variety of applications and industries.
Titanium Grade 2 Shapes in Stock:
Plate
Sheet
Pipe
Fitting
Bar & Billet
Tubing
Titanium Grade 2 Common Industries:
Architecture
Medical Industry
Chemical Processing
Desalinating
Architecture
Titanium Grade 5
Titanium Gr.5 is very common in the defense and aerospace industry due to its higher strength properties. One of its added benefits is that it can be heat-treated to increase its strength. It is excellent in seawater environments with agitators and pump impellers.
Titanium Grade 5 Shapes in Stock:
Plate
Sheet
Bar & Billet
Titanium Grade 5 Common Industries:
Rotating equipment
Naval Components
Aerospace Components
Engine Components
Marine Industry
Titanium Grade 7
Titanium Grade seven is the most corrosion-resistant of all titanium alloys. It is equivalent to Grade 2, however, it has palladium added for the most severe environments. It is commonly stocked in plates, sheets, pipes, fittings, and tubing.
Titanium Grade 7 Common Industries:
Chemical Processing
Hydrocarbon Processing
Titanium Grade 12
Titanium Gr.12 was first produced for seawater use to replace copper nickel tubing in heat exchangers. It is very weldable making it extremely versatile. It offers a lot of strength even at high temperatures. We offer this grade in plate and tubing.
Titanium Grade 12 Common Industries:
Marine Industry
Aircraft components
Heat exchangers
Chemical Manufacturing
Guide to Common Industrial Titanium Grades
| Palladium | Lean Palladium | Min YS | Min UTS | ||||||
| Grades | Grades | Grades | ksi (Mpa) | ksi (Mpa) | |||||
| Unalloyed Grades* | |||||||||
| 1 | Unalloyed (low interstitial) | 11 | Ti-0.15Pd | 17 | Ti-0.05Pd | 25 (170) | 35 (240) | ||
| 2 | Unalloyed (norm interstitial) | 7 | Ti-0.15Pd | 16 | Ti-0.05Pd | 40 (275) | 50 (345) | ||
| 3 | Unalloyed (high interstitial) | 55 (380) | 65 (450) | ||||||
| Nickel-Molybdenum Alloy | |||||||||
| 12 | Ti-0.3 Mo-0.8 Ni | ||||||||
| Aluminum Vanadium Alloys | |||||||||
| 9 | 3AI-2.5V | 18 | 3AI-2.5V-0.05 Pd | 70 (483) | 90 (620) | ||||
| 23 | 6A1-4V ELI | 110 (759) | 120 (828) | ||||||
| 5 | 6A1-4v | 24 | 6A1-4V-0.05 Pd | 120 (828) | 130 (895) |
Standard and Precious Metal Enhanced Titanium Alloys
| ASTM | Nominal | Tensile | Strength | Yield | Strength | Modulus | Endurance | Limit | *** | Elong. | ||||
| Grades** | Composition | ksi | Mpa | ksi | Mpa | of Elasticity | % of | ksi | Mpa | in 2" | ||||
| psi x 10-6 | Gpa | UTS | min,% | |||||||||||
| 1 (11,17) | Unalloyed* | 35 | 240 | 25 | 170 | 14.9 | 105-120 | 0.5 | 17.5 | 120 | 24 | |||
| 2 (7,16) | Unalloyed | 50 | 345 | 40 | 275 | 14.9 | 105-120 | 0.5 | 25 | 173 | 20 | |||
| 3 | Unalloyed | 65 | 450 | 55 | 380 | 14.9 | 105-120 | 0.5 | 32.5 | 225 | 18 | |||
| 12 | Ti 3A12.5V | 70 | 483 | 50 | 345 | 15 | 105-120 | 0.5 | 35 | 242 | 18 | |||
| 9 (18,28) | Ti 3A12.5V | 90 | 620 | 70 | 483 | 16 | 105-120 | 0.5 | 45 | 310 | 15 | |||
| 23 (29) | Ti 6A14V ELI | 120 | 828 | 110 | 759 | 16.5 | 105-120 | 0.55 | 66 | 455 | 10 | |||
| 5 (24) | Ti 6A14V | 130 | 895 | 120 | 828 | 16.5 | 105-120 | 0.55 | 71.5 | 492 | 10 |
Titanium products provided by GNEE
| Product Form | Common Grades (Typical) | Primary ASTM Standards | Standard Specifications / Dimensions | Available Shapes / Types | Surface Finish |
|---|---|---|---|---|---|
| Titanium Tube | Gr.1, Gr.2, Gr.3, Gr.7, Gr.9, Gr.12, Gr.5 (Ti-6Al-4V) | ASTM B338 | OD: 1mm - 150mm Wall Thickness: 0.5mm - 15mm Length: Up to 15,000mm |
Seamless Tube, Welded Tube, Heat Exchanger Tubes, Condenser Tubes | Pickled, Polished (Mill / Mirror), Annealed, Bright |
| Titanium Bar | Gr.1, Gr.2, Gr.5 (Ti-6Al-4V), Gr.7, Gr.9, Gr.12 | ASTM B348 | Diameter: 3mm - 300mm Length: 3,000mm or custom |
Round Bar, Square Bar, Hexagonal Bar, Wire Rod, Forged Billets | Black (Hot Rolled), Turned, Polished, Centerless Ground, Peeled |
| Titanium Sheet/Plate | Gr.1, Gr.2, Gr.5 (Ti-6Al-4V), Gr.7, Gr.9, Gr.12 | ASTM B265 | Thickness: 0.1mm - 100mm+ Width: Up to 2,000mm Length: Up to 6,000mm |
Sheet (≤ 4.76mm), Plate (> 4.76mm), Coil/Strip, Shim Stock | Hot Rolled, Cold Rolled, Pickled, Sandblasted, Polished, Brushed |
| Titanium Foil | Gr.1, Gr.2 | ASTM B265 | Thickness: 0.03mm - 0.1mm Width: Up to 500mm |
Foil, Strip | Cold Rolled, Annealed, Bright |
| Titanium Wire | Gr.1, Gr.2, Gr.5 (Ti-6Al-4V) | ASTM B863, F67 (for medical) | Diameter: 0.1mm - 8.0mm Form: Coil, Spool, Straight Length |
Welding Wire, Spring Wire, Fastener Wire, Fishing Wire | Pickled, Acid Cleaned, Polished |
| CNC Machined Parts | Gr.2, Gr.5 (Ti-6Al-4V), Gr.9, Gr.12 | ASTM B348 (Bar stock), Custom | Capability: Prototype to Mass Production Tolerance: As per customer drawing |
Flanges, Fittings, Valves, Bolts, Nuts, Custom Components Machined from billet/bar/plate |
As-machined, Sandblasted, Polished, Anodized, Bead Blasted |
