products provided by Henan Gnee New Material Co., Ltd
ASTM B338 Alloy Gr7 Titanium Pipe
High-strength Gr 2 Gr 5 Gr 7 Titanium Plate
Products Description
Titanium Grade 7 is mechanically and physically equivalent to Titanium Grade 2, with the exception of additional interstitial palladium which makes this material alloy. Grade 7 demonstrates excellent weldability, fabricability, and is the most corrosion resistance of all titanium alloys. Because of these traits, this material is often used in chemical production processes and applications within the production equipment.
Chemical Composition
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Fe 0.3% | O 0.25% | Pd 0.12 – 0.25% | C 0.08% | N 0.03% | |||||
| H 0.015% | Other, total 0.4% | Ti Remainder | |||||||
Physical properties
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat (BTU/lb-°F) | Thermal expansion (1/°F) | Melting Point (°F) |
| 0.162 | – | 12.6 | – | – | – |
Mechanical Properties
| Property | Minimum | Maximum | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Yield Strength Range (Rp0.2 Offset) (ksi) | – | 50.763 | |||||||
| Tensile Strength Range (Rm) (ksi) | – | 70.343 | |||||||
| Elongation (AL=5 x Ø) | – | 28.0% | |||||||
| Hardness (HV) | – | 150 | |||||||
| Modulus of Elasticity (ksi) (E): 14938 | |||||||||
| Machineability General Index: – | |||||||||
Titanium products provided by Henan Gnee New Material Co., Ltd
| Product Form | Common Grades (Typical) | Primary ASTM Standards | Standard Specifications / Dimensions | Available Shapes / Types | Surface Finish |
|---|---|---|---|---|---|
| Titanium Tube | Gr.1, Gr.2, Gr.3, Gr.7, Gr.9, Gr.12, Gr.5 (Ti-6Al-4V) | ASTM B338 | OD: 1mm - 150mm Wall Thickness: 0.5mm - 15mm Length: Up to 15,000mm |
Seamless Tube, Welded Tube, Heat Exchanger Tubes, Condenser Tubes | Pickled, Polished (Mill / Mirror), Annealed, Bright |
| Titanium Bar | Gr.1, Gr.2, Gr.5 (Ti-6Al-4V), Gr.7, Gr.9, Gr.12 | ASTM B348 | Diameter: 3mm - 300mm Length: 3,000mm or custom |
Round Bar, Square Bar, Hexagonal Bar, Wire Rod, Forged Billets | Black (Hot Rolled), Turned, Polished, Centerless Ground, Peeled |
| Titanium Sheet/Plate | Gr.1, Gr.2, Gr.5 (Ti-6Al-4V), Gr.7, Gr.9, Gr.12 | ASTM B265 | Thickness: 0.1mm - 100mm+ Width: Up to 2,000mm Length: Up to 6,000mm |
Sheet (≤ 4.76mm), Plate (> 4.76mm), Coil/Strip, Shim Stock | Hot Rolled, Cold Rolled, Pickled, Sandblasted, Polished, Brushed |
| Titanium Foil | Gr.1, Gr.2 | ASTM B265 | Thickness: 0.03mm - 0.1mm Width: Up to 500mm |
Foil, Strip | Cold Rolled, Annealed, Bright |
| Titanium Wire | Gr.1, Gr.2, Gr.5 (Ti-6Al-4V) | ASTM B863, F67 (for medical) | Diameter: 0.1mm - 8.0mm Form: Coil, Spool, Straight Length |
Welding Wire, Spring Wire, Fastener Wire, Fishing Wire | Pickled, Acid Cleaned, Polished |
| CNC Machined Parts | Gr.2, Gr.5 (Ti-6Al-4V), Gr.9, Gr.12 | ASTM B348 (Bar stock), Custom | Capability: Prototype to Mass Production Tolerance: As per customer drawing |
Flanges, Fittings, Valves, Bolts, Nuts, Custom Components Machined from billet/bar/plate |
As-machined, Sandblasted, Polished, Anodized, Bead Blasted |
