The anodic oxidation color of titanium metal surfaces can be achieved through different electrolyte and voltage conditions. During the anodizing process, metal ions enter the electrolyte solution and combine with anions to form oxides of varying colors. For example, TC4 titanium alloy can form oxide films in a variety of colors, including golden, blue, and purple, during anodization. The color variation of the anodized film is primarily controlled by the voltage parameter. By adjusting the voltage, the film thickness can be precisely controlled to achieve the desired color.

The color development pattern of anodized colored films shows that the color of the film changes periodically with increasing voltage, which is related to the principle of thin-film interference. During the low-voltage anodizing stage, the colored film layer of TC4 titanium alloy is composed of dense and uniform amorphous titanium dioxide, and its color development is primarily due to the thin-film interference principle. Furthermore, the growth rate of the anodized film varies with different electrolyte solutions. For example, in a Na2SiO3 salt solution, the growth rate can range from 1 nm/V to 1.7 nm/V. Anodizing titanium alloys not only enhances their wear and corrosion resistance but also allows for the introduction of a variety of colors without the use of external pigments or dyes. The color change during anodizing is continuous and cyclical, directly related to voltage and film thickness. This phenomenon eliminates the hypothesis that the oxide influences the color and proves that the color is primarily generated by interference.
Research has also found that different titanium alloys exhibit varying oxide film colors under the same anodizing process conditions, likely related to differences in alloy composition. Furthermore, the smooth surface of anodized films facilitates more accurate results when studying their color and optical properties.
Overall, anodizing titanium not only enhances its performance but also imparts a rich color palette, which has a wide range of applications, including decoration, identification, and differentiation of various materials and components.
The company boasts leading domestic titanium processing production lines, including:
German-imported precision titanium tube production line (annual production capacity: 30,000 tons);
Japanese-technology titanium foil rolling line (thinnest to 6μm);
Fully automated titanium rod continuous extrusion line;
Intelligent titanium plate and strip finishing mill;
The MES system enables digital control and management of the entire production process, achieving product dimensional accuracy of ±0.01μm.






