1, titanium and titanium alloy piping set titanium and titanium alloy pipe transportation and storage, titanium pipe manufacturer must be careful not to contact or collision with ferrous materials.
2, titanium and titanium alloy tubing cutting should be done by mechanical methods, and the cutting speed should be low; when cutting or grinding titanium tubing with an abrasive wheel, a special abrasive wheel should be used; do not use flame cutting. The groove should be processed by mechanical methods.
3, titanium alloy welded pipe should be used inert gas protection or vacuum welding method welding with oxygen - acetylene or carbon dioxide gas protection welding, also shall not use ordinary manual arc welding.
4, titanium and titanium alloy pipe shall not be installed with iron tools and materials impact and extrusion; should be inserted between the carbon steel bracket, stringer and titanium and titanium alloy pipe rubber or soft plastic plate, so that it does not come into direct contact with the titanium and titanium alloy pipe; titanium and titanium alloy piping should be installed through the walls and slats of the casing, the gap is not less than 10 millimeters, and should be filled with insulating materials, shall not be insulating materials containing iron impurities.
5, titanium and titanium alloy pipe shall not be directly welded with other metal pipes. When connection is required, casing flange connection can be used. The use of non-metallic gaskets are generally rubber gaskets or plastic gaskets, and should control the chlorine ion content shall not exceed 25ppm.
