Based on the understanding of the machining mechanism of titanium alloy and the past experience, the main process know-how for machining titanium alloy is as follows:
(1) Use inserts with positive angular geometry to minimize cutting forces, cutting heat and workpiece deformation.
(2) Maintain a constant feed to avoid hardening of the workpiece. The tool should always be fed during the cutting process and the radial draft a e should be 30% of the radius during milling.
(3) Use high-pressure high-flow cutting fluid to ensure thermal stability of the machining process and to prevent surface denaturation of the workpiece and damage to the cutting tool due to excessively high temperature.
(4) Keep insert edges sharp; dull tools are the cause of heat buildup and wear, which can easily lead to tool failure.
(5) Machine titanium alloys in their softest state possible, as the material becomes more difficult to machine after hardening, and heat treatment increases the strength of the material and increases wear on the insert.
(6) Use a large tip radius or chamfer cut to put as much of the cutting edge into the cut as possible. This reduces cutting forces and heat at each point and prevents localized breakage. When milling titanium alloys, cutting speed has the greatest effect on tool life vc among the various cutting parameters, with radial draft (depth of milling) ae second.





