Mar 05, 2024 Leave a message

Titanium Alloy Powder Metallurgy Processing MIM And 3D Printing

Titanium and its alloys are widely used in aerospace, military and marine fields due to their low density, high specific strength, biocompatibility and good stability at medium and high temperatures, as well as good mechanical properties and excellent corrosion resistance. The traditional melt forging processing technology has advantages in the preparation of large size, simple shape titanium profiles or products, but in the preparation of complex structure, small and medium-sized titanium products, there are problems such as low yield, waste of resources and high production costs. Powder near-final forming technology can precisely make up for this technical defect, through the powder preparation, near-final forming technology route can be batch or customized manufacturing of titanium alloy products of various scales and structural characteristics. This kind of small and medium-sized products in the aerospace, military, medical and civil consumption areas have greater application potential and added value, is the future promotion of the titanium industry, low-carbon, green manufacturing transformation of an important direction.
1, pressed sintering
The United States in the titanium powder pressing sintering preparation of titanium alloy products research is very early. Dynamet Technology has been committed to the production of titanium powder pressing molding products, as shown in Figure 1, some of the products have been applied on a small scale. The first powder metallurgy titanium product produced by the company was the Ti-6Al-4V alloy preform for the dome shell on Raytheon's Rattlesnake missile, and later produced powder metallurgy Ti-6Al-6V-2Sn alloy products for application in the warhead shell of the Stinger missile. As a result of its significant contribution to titanium products, Dynamet Technology became the sole supplier of powdered titanium alloy products to Boeing. In addition, American ADMA Products has been producing powder metallurgy titanium parts since 1985, and some of its products are used in aerospace field. China's Northwest Nonferrous Metals Research Institute in the field of titanium powder near-net forming research and development has been more than 30 years of experience, the development of porous titanium products have been applied in the chemical industry, food and other fields, Figure 1 (b) shown in the filtration industry for the application of powder rolled porous titanium plate.
2,Hot Isostatic Pressing
Hot isostatic pressing (HIP) process was invented by the United States Battelle (Battelle) Institute in the 1950s, the technology is a kind of inert gas as the pressure transfer medium, in the temperature of 850-2000 ℃ and 100-200 MPa under the synergistic effect of gas pressure, the products of high temperature pressing and sintering technology, is the current near-net-shaping of powder titanium and titanium alloy structural parts of the whole Densification of the most important means of products with uniform organization, no weaving, no segregation and other characteristics.

3, powder injection molding
Metal powder injection molding (Metal Injection Molding, MIM) technology can be directly prepared with or close to the final shape of the parts, avoiding or reducing machining, significantly reducing the cost of preparation. Therefore, powder injection molding technology is one of the most effective technical means for mass production of titanium and titanium alloy parts. 3C products (including cell phones, smart wearable, eyeglass frames, 5G signal parts) in electronic communication is the most important application field of powder injection molding technology, accounting for 84.2%. At this stage, the main iron-based materials, and the lightweight design of the material and the pursuit of high quality is the main direction of the future development of 3C products. Titanium alloy has a low density (density of only half of the iron-based materials), high strength, corrosion resistance and other characteristics, to meet the future of lightweight materials and high-quality design. According to statistics, the market size of China's titanium injection molding industry reached 680 million yuan in 2020, and the market size is expected to reach 2 billion yuan in 2026, with an annual growth rate of up to 20.13%, according to the demand-side inputs and supply-side revenue growth projections.

4, Additive Manufacturing
Additive Manufacturing (Additive Manufacturing, AM) is a point, line, surface layer by layer cumulative molding technology, it is not affected by the complexity of the parts, can automatically, quickly and accurately complete the design and manufacture of complex parts. Compared with traditional manufacturing technologies, additive manufacturing has unique advantages in terms of design freedom, complex part molding, and material utilization, making it a highly promising titanium alloy manufacturing technology. The global metal 3D printing market reached $3.3 billion in 2019, including 3D printing equipment, materials, and services, and is expected to reach $11 billion in 2024, with titanium alloys being the most important metal to print, according to SmarTech Analytics. Aerospace and military defense is the number one user of titanium additive manufacturing, which has been successfully used for the direct forming of small precision components for space engines and large and complex components for aviation, such as space launch systems, aircraft wings, integral control surfaces and hatches, engine blades and other key flying equipment components.
As the basic raw material of the above powder metallurgy near final molding process, the cost and quality of powder metallurgy products are the most important factors affecting the price and performance of powder metallurgy products. Ltd. for titanium alloy powder traditional preparation process is complex, expensive, low yield of fine powder technology bottleneck, after three years of research and development of a new way to create a micro-fine titanium powder preparation process, independently complete the design and development of the powder production level equipment, to achieve the particle size of a new type of high-quality titanium powder can be controlled by the batch preparation. The yield of fine powder has been increased from 35% to 80%, and the cost has been reduced by more than 40%, which can be applied to high-end manufacturing fields such as powder injection molding, additive manufacturing, and hot isostatic pressing of powder. The main product types include pure titanium, TC4, TA15 and other grades of high-quality titanium-based powders with controllable particle size, as well as hydrogenated titanium-based alloy powders, hydrogenated dehydrogenated powders, and titanium-based customized metal matrix composite powders.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry