Since the discovery of the element titanium in 1790, mankind in order to obtain its extraordinary performance, and carried out a hundred years of arduous exploration. 1910 mankind for the first time to produce the metal titanium, but titanium alloys of the application of the road is difficult and long, until 40 years later in 1951 to finally realise the industrial production.
Titanium alloy has high specific strength, corrosion resistance, high temperature resistance, fatigue resistance and other characteristics. The same size of titanium alloy weight is only 60% of steel, but it is higher than the strength of alloy steel. Due to its good characteristics, titanium alloy has been more and more widely used in aviation, aerospace, power generation equipment, nuclear energy, ships, chemical industry, medical equipment and other fields.
Reasons why titanium alloys are difficult to machine
The four characteristics of titanium alloy, such as low thermal conductivity, severe work hardening, high affinity with the tool, and small plastic deformation, are the essential reasons why titanium alloy is difficult to machine. Its cutting index is only 20% of that of easy-to-cut steel.
Low thermal conductivity
Titanium alloy thermal conductivity is only about 16% of 45# steel, processing heat can not be conducted out in time, resulting in cutting edge local high temperature (processing tip temperature is more than 1 times that of 45# steel), easy to cause tool diffusion wear.
Serious work hardening
Titanium alloy machining hardening phenomenon is obvious, the surface hardening layer compared to stainless steel to be serious, will cause some difficulties to the subsequent processing, for example, tool boundary damage increases.
High affinity with cutting tools Severe bonding with titanium-containing carbide.
Small plastic deformation
About 1/2 of the modulus of elasticity of 45 steel, so the elastic recovery is large and friction is severe. Also, the workpiece is prone to clamping deformation.
Mar 08, 2024
Leave a message
Why Is Titanium Difficult To Machine?
Send Inquiry





