AMS 4954 Ti6Al4V Titanium Alloy Welding Wire

Product Introduction

1.1 Form:

This specification covers a titanium alloy in the form of welding wire.

1.2 Application:

This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of titanium alloys, but usage is not limited to such applications.

3.1 Wire Composition:

Shall conform to the percentages by weight shown in Table 1; oxygen shall be determined in accordance with ASTM E1409, hydrogen in accordance with ASTM E1447, and other elements by wet chemical methods in accordance with ASTM E 120, by spectrochemical methods, or by other analytical methods acceptable to the purchaser.

3.3 Condition:

Cold drawn, bright finish, in a temper and with a surface finish which will provide proper feeding of the wire in machine welding equipment.

3.5 Properties:

Wire shall conform to the following requirements:

3.5.1 Weldability: Melted wire shall flow smoothly and evenly during welding and shall produce acceptable welds. ARP1876 may be used to resolve disputes.

3.5.2 Spooled Wire: Shall conform to 3.5.2.1 and 3.5.2.2.

3.5.2.1 Cast: Wire, wound on standard 12-inch (305-mm) diameter spools, shall have imparted to it a curvature such that a specimen sufficient in length to form one loop with a 1-inch (25-mm) overlap, when cut from the spool and laid on a flat surface, shall form a circle 15 to 50 inches (381 to 1270 mm) in diameter.

3.5.2.2 Helix: The specimen on which cast was determined, when laid on a flat surface and measured between adjacent turns, shall show a vertical separation not greater than 1 inch (25 mm).

3.7 Sizes and Tolerances:

Wire shall be supplied in the sizes and to the tolerances shown in 3.7.1 and 3.7.2.

3.7.1 Diameter: Shall be as shown in Table 2.

3.7.2 Length: Cut lengths shall be furnished in 18, 27, or 36 inch (457,686, or 914mm) lengths, as ordered, and shall not vary more than +0, -1/2 inch (-12.7 mm) from the length ordered.

About Us

Gnee Group is a supply chain integrated enterprise including metal plate, coil, profile, outdoor landscape design and processing. Founded in 2008, with 5 million RMB registered capital, Gnee has made impressive progress and development in steel market with Gnee People more than 10 years hard fighting.

Hot Tags: ams 4954 ti6al4v titanium alloy welding wire, China ams 4954 ti6al4v titanium alloy welding wire manufacturers, suppliers, factory, titanium, titanium wire for amplifiers, titanium wire for machining centers, titanium wire for motors, titanium wire for radio frequency devices, titanium wire for industrial automation, Titanium Gr5 Round Wire