GR1 products provided by GNEE
What is Grade 2 Titanium Pipe?
Grade 2 titanium tubing is a commercially pure titanium alloy containing small amounts of iron, oxygen, and other components. Grade 2 titanium tubing is currently the most commonly used titanium alloy and is approved for use in sour service systems. These tubing offers enhanced resistance to corrosive wastewater in harsh environments. Its high strength makes it suitable for high-pressure and high-temperature applications. This lightweight tubing offers a superior strength-to-weight ratio. It is biocompatible and can be used to transport both liquids and gases within the system.
A Titanium Grade 2 Tube possesses higher strength than a pipe but is generally seen in use in smaller diameter applications. These tubes can be both hot and cold rolled and subsequently galvanized. The Astm B338 Grade 2 Titanium Tube has good ductility and cold formability. These tubes allow for a better welding process, following standard fabrication procedures. A CP Grade 2 Titanium Tubing is slightly difficult to cast due to its superior strength. This tubing is slightly expensive as it is rare. The Titanium Alloy Gr 2 Hollow Pipe has a minimum tensile strength of 485mpa with a minimum yield strength of 345mpa and has an elongation at a break of 28%. These pipes have a hardness between 160 to 200 HV.
What is Titanium Grade 2 Seamless Pipe?
A titanium gr 2 seamless pipe is a single piece of metal produced via an extrusion process. The Titanium Grade 2 Seamless Pipe is manufactured in sizes of 24 inches or less. These pipes possess superior strength and are less prone to corrosion. The pipes have a rough surface due to the extrusion process. They are slightly more expensive than a Titanium Gr 2 Erw Pipe but are seen in higher pressure and temperature applications. The production process of a seamless pipe is also complex and long in comparison to a UNS R50400 Efw Pipe. They are also less available due to the limited material type, making them the most sought-after in the industry.
Titanium products provided by GNEE
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
Grade 1-Unalloyed titanium
Grade 2-Unalloyed titanium
Grade 3-Unalloyed titanium
Grade 7-Unalloyed titanium plus 0.12 to 0.25 %palladium
Grade 9-Titanium alloy (3 % aluminum, 2.5 % vanadium)
Grade 12-Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
|
|
Standard
|
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862,AMS4911,AMS4928
|
|
Shape
|
Round Square Rectangle
|
|
Type
|
Seamless/Welded
|
|
|
Seamless titanium tube: Titanium sponge-Compacting electrodes-melting-Forge-Bar billets-Extruding-Rolled-Straightening-Seamless tube
Welded titanium tube: Titanium sponge-Compacting electrodes-melting-Forge-Plate billets-Hot rolled-Cold rolled-Titanium scrap-Welded-Welded tube |
|
Surface
|
Polishing, picking, acid washed, black oxide
|
|
Application
|
1) Heat Exchanger, Condensers, Water Treatment, Desalination
2) Fluid, gas and oil transport
3) Pressure and heat transmission
4) Construction and ornament
5) Motorbycle and bike
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Product name |
Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy rod |
|
Standard |
GB/T 2965-2007 GB/T 13810-2007, ASTM B348,ASTM F67,ASTM F136, AMS4928,MIL4911 |
|
Titanium type |
Commercially Pure(CP) / Titanium alloy |
|
Grade |
TA1 TA2 TA3 TA4 TA5 TA6 TA7 TA8 TA9 TA10 TA11 TA12 TA13 TA14 |
|
Diameter |
3-350mm |
|
Length |
Max6000mm |
|
Technique |
Forging, machining |
|
Surface |
Acid surface or polishing, sand blasted surface |
|
Shape |
Round, flat, square, hexagonal |
|
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
|
Item |
Titanium plate,Titanium sheet |
|
Grade |
GR1,GR2,GR5,GR7,GR9,GR12,GR23,etc. |
|
Size |
0.3-3mm≤1000-1500mm≤12000mm or as your request |
|
Standard |
ASTM B265, ASME SB265,AMS491 |
|
Material |
pure titanium ( gr1, gr2, gr3,,gr4) |
|
Titanium Alloy(GR5, GR7,GR9,GR23,TI-6AL-7NB) |
|
|
Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-2Sn-4Zr-6Mo |
|
|
Ti-V(15wt%)-Cr(3wt%)-Sn(3wt%)-Al(3wt%) |
|
|
Quality and test |
Hardness test, Bending test, Hydrostatic etc. |
|
Application |
chemical, industry, sports etc. |
|
Feature |
High corrosion resistance, low density, good thermal stability |
|
Technics |
Hot rolled,Cold Rolled |
|
Surface |
Bright, Polished, Pickling, Acid cleaning, Sandblasting |
|
item |
Titanium wire |
|
Grade |
Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9,, Gr23, etc. |
|
Millimeter(mm) |
0.8mm - 6.0mm |
|
Technology |
Hot-Rolled, Cold-Rolled, Hot forging , Machining |
|
Standard |
ASTM B265, AMS 4911, AMS 4916, ASTM F67, ASTM F136,AWS A5.16 |
|
Condition |
Cold rolled(Y), Hot rolled(R), Annealed (M), Quenching(C) |
|
Shape |
Straight, Spool, Coil |
|
Surface |
Acid Washed, Polished surface, Grinding Polished |
|
Advantage |
1.Low Density and High Specification Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property |
|
Application |
Military,Medical, Industry,Glasses,Jewelry, Ornaments,welding,Sporting goods,Motor vehicle,Electroplating |
|
Delivery Time |
Within 7-15 Days |
