GR1 products provided by GNEE
GR1 titanium tube is light in weight, high in strength and superior in mechanical properties. Widely used in shell and tube heat exchangers, coil heat exchangers, serpentine tube heat exchangers, condensers, evaporators and pipelines and other heat exchange equipment.
Advantages:
GR1 titanium tube is mainly made of industrial pure titanium (commercial pure titanium), with a purity of more than 99.5%. Its chemical composition mainly includes titanium (Titanium) and a small amount of impurity elements, such as oxygen (oxygen), carbon (carbon), gas (nitrogen), iron (iron) and so on. GR1 titanium tube is one of the purest titanium tubes. It is mainly used in places with high corrosion resistance, good plasticity and places where bending is required. It is widely used in the field of bicycle manufacturing, especially for the manufacture of key components such as bicycle frames. Due to light weight, high strength and corrosion resistance, GR1 titanium tubes for bicycles can provide excellent riding comfort.
product description
Gr1 titanium is an unalloyed, low strength titanium product with low oxygen content and high formability. Because of all these qualities, this grade is the material of choice for any application requiring ease of forming, usually in titanium sheet, tube and rod
Available in material form. Titanium tubes are light in weight, high in strength and superior in mechanical properties.
equipment and many other fields .
Chemical composition (ASTM B348)
chemical properties and mechanical properties table
chemical properties and mechanical properties table
|
GR1 titanium tube chemical composition (%) |
|
||||||||||||
|
|
o |
C |
N |
h |
Fe |
Residuals |
AL |
PD |
Mo |
Ni |
Others |
V |
Ti |
|
GR1 |
0.18 Max |
0.08 Max |
0.03 Max |
0.015 Max |
0.20 Max |
0.4 Max |
|
|
|
|
|
|
Bal |
Mechanical properties (ASTM B348)
|
Grade |
Tensile strength , MPa (min) |
Yield strength , MPa (min) |
Elongation , % (min) |
Area reduction rate , % (min) |
|
Gr1 |
240 |
170 |
twenty four |
30 |
Application fields:
Chemical processing industry (pure titanium Gr1 or Gr2 plate or pipe), medical, aerospace, chemical, bicycle, sports equipment and design equipment....
Titanium products provided by GNEE
|
Name |
Titanium Tube & Pipe |
|||
|
Material |
Pure Titanium/ Titanium Alloy |
|||
|
Standard |
GB/T 3624,GB/T 3625,GB/T 26057
ASTM B337,ASTM B338,ASTM B861,ASTM B862 JIS H 4630 |
|||
|
Common Grade |
National standard grades: TA1, TA2, TC4, TA9, TA18, TA10 |
|||
|
|
Length: 50-6000mm or according to customer requirements |
|||
|
Outer diameter: 3-300mm or according to customer requirements |
||||
|
Wall thickness: 0.2-5.5mm or according to customer requirements |
||||
|
Section shape |
Round / Square/Oval/Spiral/Bar |
|||
|
Surface |
Bright annealing, Pickling,Polishing |
|||
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
|
|
Standard
|
ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4928 etc
|
|
Shape
|
Titanium round rod/bar, Titanium square rod/bar,Titanium flat rod/bar
Titanium rectangle rod/bar, Titanium hex rod/bar |
|
Diameter
|
1-300mm,customizable
|
|
Length
|
50mm-6000mm,customizable
|
|
Tolerance
|
h6~h13 H10~H13
|
|
Surface
|
Bright/Polished/ Machined
|
|
Main Technique
|
Hot Forged; Hot Rolled; Cold drawn; Straighten etc
|
|
Heat Treatment
|
Usually are Annealled,but Solid Solution & Aging can be also OK
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical, aerospace, etc.
|
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23/Ti-15333 etc
|
|
Standard
|
ASTM B265/ASME SB265, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4911 etc
|
|
Shape
|
Titanium foil strip/Titanium sheets plate/Titanium coil
|
|
Thickness
|
0.02mm~100mm
|
|
Width
|
10-3000mm,customizable
|
|
Length
|
Customizable
|
|
Surface
|
Pickled/Sandblasting/Polishing
|
|
Main Technique
|
Hot Rolled /Cold Rolled
|
|
Heat Treatment
|
Usually are Annealled,but Solid Solution & Aging can be also OK
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical,aerospace, etc.
|
|
Product Name |
Titanium Wire |
|
Diameter |
0.2-6.0Mm or as required |
|
Standard |
AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc |
|
Application |
welding |
|
Surface |
Bright or black and painting according to customer requirement |
|
Thickness Tolerance |
±0.01mm |
|
Model Number |
Gr1, Gr2...Gr12 |
|
MOQ |
100kgs.We also can accept sample order. |
|
Shipment Time |
Within 3-5 workdays after receiving deposit or L/C |
|
Export Packing |
Waterproof paper, and steel strip packed. |
|
Capacity |
250,00 tons/year |
