Products Description
Titanium Gr 5 Gr7 Gr9 Straight Pipe
Thin Walled Gr23 Capillary Titanium Tubes
Grade 2 High Purity Titanium Foil
Material selection is crucial in aircraft design and manufacturing, especially in areas of the wing that are subject to extreme temperatures and weight. The leading edge of an aircraft wing can reach temperatures as high as 538°C during flight due to friction with high-speed airflow. This extremely high-temperature environment places extremely high demands on the material's heat resistance. Traditional aluminum alloys, while lightweight and strong, cannot maintain their structural integrity and performance at such high temperatures, making them unsuitable for this application.
On the other hand, while FeNi-based alloys can withstand high temperatures to a certain extent, their high density increases the overall weight, negatively impacting the aircraft's fuel efficiency and performance. Therefore, based on a comprehensive consideration of heat resistance, lightness, and strength, titanium alloys are the ideal choice for wing leading edges. In particular, Ti6Al-4V alloy, due to its excellent heat resistance, high strength, and relatively low weight, is the material of choice for aircraft wing leading edges.




Furthermore, during wing manufacturing, a fixture mechanism is required to secure the wing to the supporting structure. These fixtures not only need to bear the weight of the wing but also maintain high precision during the manufacturing and assembly process. Similarly, due to the excellent strength and corrosion resistance of titanium alloys, Ti6Al4V alloy is widely used in the manufacture of these fixtures. This not only ensures the durability and precision of the fixtures, but also helps improve the manufacturing quality and reliability of the entire wing.
In summary, titanium alloys, particularly Ti6Al-4V alloy, play a key role in the manufacture of aircraft wings. They not only meet the high-temperature and lightweight material requirements of the wing leading edge, but also improve the durability and manufacturing precision of the fixtures, providing a strong guarantee for the overall performance and safety of the aircraft.
Titanium specifications provided by Henan Gnee New Material Co., Ltd
CNC machined parts
|
Type
|
Drilling, Etching,Chemical Machining, Laser MachiningMilling, Other Machining Service, Turning, Wire EDM,Rapid Prototyping
|
|||
|
Material
|
Titanium,Aluminum, Brass, Bronze, Copper, Hardened Metal, Pre-cious Metal, Stainless Steel, Steel Alloy
|
|||
|
Process
|
CNC Machining,CNC Turning, CNC Milling, CNC Boring,CNC Grinding,CNC Drilling
|
|||
|
Surface Treatment
|
Anodizing,Plating,Polishing,Sandblasting,Laser Engraving,Oxide Black,Nickel Plating,Chrome Plat Or Customer's Requirements
|
|||
|
Tolerance
|
+/-0.01mm
|
|||
|
Lead Time
|
Sample: 7 days
|
|||
|
Mass Production
|
2-3 weeks
|
|||
|
Package
|
Standard Carton Or Plastic Tray, Sponge Tray, CardboardTray, etc., Can Be Customized According To CustomerRequirements
|
|||
|
Application
|
Appliance,Auto, Building, Capital equipment, Energy,Instrumentation,Medical device.Telecommunications
|
|||
Titanium tube
|
Material |
Pure Titanium/ Titanium Alloy |
|
Standard |
GB/T 3624,GB/T 3625,GB/T 26057
ASTM B337,ASTM B338,ASTM B861,ASTM B862 JIS H 4630 |
|
Common Grade |
National standard grades: TA1, TA2, TC4, TA9, TA18, TA10 |
|
|
Length: 50-6000mm or according to customer requirements |
|
Outer diameter: 6-80mm or according to customer requirements |
|
|
Wall thickness: 0.35-10mm or according to customer requirements |
|
|
Production Process |
Welding or Seamless |
|
Section shape |
Round and others |
|
Surface |
Bright annealing, Pickling,Polishing |
|
Packing |
Coil or straight length by boxes |
Titanium rod
|
item |
Titanium Bars /Titanium Rod |
|
Standard |
GB/T2965-2007,JIS H4650-2001,ASTM B348-06,DIN17862-93, ASTM F136,AMS4928,GB/T13810,Q/BS5331-91,etc |
|
Grade |
TA1,TA2,TA3,TA7,TA9,TA10,TC4,TC4ELI,TC6,TC9,TC10,TC11, GR1,GR2,GR3,GR5,GR7,GR12 |
|
Diameter |
1-500mm |
|
Length |
1-12m |
|
Surface |
Black,polish,brush,hair line,etc |
|
Package |
Standard export package ,by wooden box ,or as required |
|
Application |
Titanium bar Is mainly used in machinery and equipment, electroplate equipment, medical and all kinds of precision parts and other industries |
Titanium Sheet/Coil
|
Titanium Plate and sheet Type |
Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim |
|
Grade |
Gr1 Gr2 Gr3 Gr4 Gr7 Gr9 Gr12 ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
|
Titanium Alloy Plate Length |
1000mm-13000mm or as required |
|
Titanium Plate Width |
1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
|
UNS Plate Thickness |
0.3 to 120mm or as required |
|
ASTM B265 Titanium Alloy Plate Process |
Hot/ Cold Rolled/forging |
|
Titanium Sheet ASTM |
ASTM B265 |
|
Titanium Sheet AMS |
AMS 4902 |
|
Tolerances of width and thickness |
EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy strip for springs,EN 10088 ASTM B265 Titanium Alloy strip |
|
Cp Titanium Plate standards and approvals |
EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
|
Standard Plate & Sheet Sizes |
1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
|
Cold rolled Titanium Plate 0.5-6.4 mm |
|
|
Hot rolled Titanium Plate 3.0–60.0 mm |
|
|
UNS Plate Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Sheet suppliers |
|
Availability of Titanium Alloy Foil sizes |
Thickness : 8-100 microns (0.00031-0.004 in) |
|
Width: Up to 500 mm (19.5 in) |
|
|
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. |
|
|
Cutting |
To provide a comprehensive service, we use a variety of cutting methods, including: |
|
Plasma profiles |
As per customer's drawings |
|
Value added services for Cp Titanium Plate |
Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and |
|
China Titanium Plate Manufacturer |
ASTM B265 Titanium Alloy Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width; Titanium Sheet: |
|
UNS Plate Origin |
CHINA |
|
Packing of DIN plate |
Bundles with waterproof cloth outside or plywood box |
|
Test |
UT, SGS testing, TUV etc |
titanium wire
|
Product Name |
Factory direct titanium wire pure titanium alloy wire special specifications can be sold |
|
Material |
Pure titanium and Titanium alloy |
|
Titanium Grade |
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
ERTi-1/ERTi-2/ERTi-3/ERTi-4/ERTi-5Eli/ERTi-7/ERTi-9/ERTi-11/ERTi-12 Ti15333/Nitinol Alloy |
|
Standard |
AWS A5.16/ASTM B863/ASME SB863, ASTMF67, ASTM F136, ISO-5832-2(3) etc |
|
Shape |
Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire |
|
Wire Gauge |
Dia(0.06--6) *L |
|
Process |
Bar billets-hot rolling-drawing-annealing-strength-pickling |
|
Surface |
Polishing, picking, acid washed, black oxide |
|
Main Technique |
Hot Forged; Hot Rolled; Cold drawn; Straighten etc |
|
Material Milling Certificate |
According to. EN 10204.3.1 |
|
Application |
Welding, Industry, Medical, Aerospace, Electronic etc |
The company boasts leading domestic titanium processing production lines, including:
German-imported precision titanium tube production line (annual production capacity: 30,000 tons);
Japanese-technology titanium foil rolling line (thinnest to 6μm);
Fully automated titanium rod continuous extrusion line;
Intelligent titanium plate and strip finishing mill;
The MES system enables digital control and management of the entire production process, achieving product dimensional accuracy of ±0.01μm.






