Products Description
Titanium Gr 5 Gr7 Gr9 Straight Pipe
Thin Walled Gr23 Capillary Titanium Tubes
Grade 2 High Purity Titanium Foil
Coatings play a crucial role in the titanium sheet stamping process. Similar to other materials, coatings and lubricants may be applied to the surfaces of the rough stock and preform, as well as to certain key areas of the die during forming. This step is primarily intended to optimize the forming process, improve product quality, and extend tool life.
The primary purpose of coatings in titanium sheet stamping is to improve the surface quality of the part. Coatings significantly reduce friction between the part and the tool, thereby reducing the risk of scratches and resulting in a smoother, flatter surface. This not only enhances the product's aesthetics but also its durability and functionality.
Secondly, coatings protect titanium parts from oxidation during titanium sheet stamping. Especially during high-temperature forming, friction between the part and the die generates significant heat, making the part surface susceptible to oxidation. Coatings effectively isolate the part from the air, reducing its exposure to oxygen, thereby preventing or minimizing oxidation and preserving the titanium part's original metallic properties and color.
Furthermore, coatings can reduce the pressure required for forming. By reducing friction between the part and the mold, coatings can make the forming process smoother, thereby lowering the required forming pressure and improving production efficiency.




Coatings also extend the life of the mold. During the forming process, the mold is subjected to constant wear and impact. Coatings form a protective layer, reducing direct contact between the mold and the part, thereby reducing mold wear and extending its service life.
Furthermore, coatings can control the flow of the material during the forming process. By adjusting the type of coating and the application method, the direction of material flow can be precisely controlled, ensuring the dimensional and shape accuracy of the formed part.
To meet these requirements, coatings generally need to meet a series of performance requirements. First, the coating should have excellent corrosion resistance, be free of harmful ingredients, and not contaminate the titanium plate material. Second, the coating should have a certain degree of adhesion, allowing it to be easily applied to the surface of the part and mold, forming a uniform coating. Third, the coating should be strong enough to resist damage during use and continue to provide lubrication and protection. Furthermore, the coating should have good lubricity, significantly reducing the coefficient of friction between the part and the mold. At the same time, the coating should be easy to remove, leaving no residue on the part surface that could affect subsequent processing and use. Furthermore, the coating should be harmless to the operator's health and pose no occupational hazards. Finally, the coating should be relatively inexpensive to reduce production costs and improve economic efficiency.
Thus, titanium alloy plate manufacturers need to categorize and select coatings for forming applications based on the specific application conditions. Generally speaking, coatings can be divided into two categories: ambient temperature forming (cold forming) and high temperature forming. Ambient temperature forming coatings are primarily used for titanium plate parts stamped at room temperature and require relatively high lubricity and adhesion. High temperature forming coatings, on the other hand, are primarily used for titanium plate parts stamped at high temperatures and require more stringent anti-oxidation and high temperature resistance. By selecting the appropriate coating, titanium alloy plate manufacturers can ensure optimal performance and quality during the forming process.
Titanium specifications provided by Henan Gnee New Material Co., Ltd
CNC machined parts
|
Type
|
Drilling, Etching,Chemical Machining, Laser MachiningMilling, Other Machining Service, Turning, Wire EDM,Rapid Prototyping
|
|||
|
Material
|
Titanium,Aluminum, Brass, Bronze, Copper, Hardened Metal, Pre-cious Metal, Stainless Steel, Steel Alloy
|
|||
|
Process
|
CNC Machining,CNC Turning, CNC Milling, CNC Boring,CNC Grinding,CNC Drilling
|
|||
|
Surface Treatment
|
Anodizing,Plating,Polishing,Sandblasting,Laser Engraving,Oxide Black,Nickel Plating,Chrome Plat Or Customer's Requirements
|
|||
|
Tolerance
|
+/-0.01mm
|
|||
|
Lead Time
|
Sample: 7 days
|
|||
|
Mass Production
|
2-3 weeks
|
|||
|
Package
|
Standard Carton Or Plastic Tray, Sponge Tray, CardboardTray, etc., Can Be Customized According To CustomerRequirements
|
|||
|
Application
|
Appliance,Auto, Building, Capital equipment, Energy,Instrumentation,Medical device.Telecommunications
|
|||
Titanium tube
|
Material |
Pure Titanium/ Titanium Alloy |
|
Standard |
GB/T 3624,GB/T 3625,GB/T 26057
ASTM B337,ASTM B338,ASTM B861,ASTM B862 JIS H 4630 |
|
Common Grade |
National standard grades: TA1, TA2, TC4, TA9, TA18, TA10 |
|
|
Length: 50-6000mm or according to customer requirements |
|
Outer diameter: 6-80mm or according to customer requirements |
|
|
Wall thickness: 0.35-10mm or according to customer requirements |
|
|
Production Process |
Welding or Seamless |
|
Section shape |
Round and others |
|
Surface |
Bright annealing, Pickling,Polishing |
|
Packing |
Coil or straight length by boxes |
Titanium rod
|
item |
Titanium Bars /Titanium Rod |
|
Standard |
GB/T2965-2007,JIS H4650-2001,ASTM B348-06,DIN17862-93, ASTM F136,AMS4928,GB/T13810,Q/BS5331-91,etc |
|
Grade |
TA1,TA2,TA3,TA7,TA9,TA10,TC4,TC4ELI,TC6,TC9,TC10,TC11, GR1,GR2,GR3,GR5,GR7,GR12 |
|
Diameter |
1-500mm |
|
Length |
1-12m |
|
Surface |
Black,polish,brush,hair line,etc |
|
Package |
Standard export package ,by wooden box ,or as required |
|
Application |
Titanium bar Is mainly used in machinery and equipment, electroplate equipment, medical and all kinds of precision parts and other industries |
Titanium Sheet/Coil
|
Titanium Plate and sheet Type |
Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim |
|
Grade |
Gr1 Gr2 Gr3 Gr4 Gr7 Gr9 Gr12 ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
|
Titanium Alloy Plate Length |
1000mm-13000mm or as required |
|
Titanium Plate Width |
1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
|
UNS Plate Thickness |
0.3 to 120mm or as required |
|
ASTM B265 Titanium Alloy Plate Process |
Hot/ Cold Rolled/forging |
|
Titanium Sheet ASTM |
ASTM B265 |
|
Titanium Sheet AMS |
AMS 4902 |
|
Tolerances of width and thickness |
EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy strip for springs,EN 10088 ASTM B265 Titanium Alloy strip |
|
Cp Titanium Plate standards and approvals |
EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
|
Standard Plate & Sheet Sizes |
1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
|
Cold rolled Titanium Plate 0.5-6.4 mm |
|
|
Hot rolled Titanium Plate 3.0–60.0 mm |
|
|
UNS Plate Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Sheet suppliers |
|
Availability of Titanium Alloy Foil sizes |
Thickness : 8-100 microns (0.00031-0.004 in) |
|
Width: Up to 500 mm (19.5 in) |
|
|
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. |
|
|
Cutting |
To provide a comprehensive service, we use a variety of cutting methods, including: |
|
Plasma profiles |
As per customer's drawings |
|
Value added services for Cp Titanium Plate |
Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and |
|
China Titanium Plate Manufacturer |
ASTM B265 Titanium Alloy Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width; Titanium Sheet: |
|
UNS Plate Origin |
CHINA |
|
Packing of DIN plate |
Bundles with waterproof cloth outside or plywood box |
|
Test |
UT, SGS testing, TUV etc |
titanium wire
|
Product Name |
Factory direct titanium wire pure titanium alloy wire special specifications can be sold |
|
Material |
Pure titanium and Titanium alloy |
|
Titanium Grade |
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
ERTi-1/ERTi-2/ERTi-3/ERTi-4/ERTi-5Eli/ERTi-7/ERTi-9/ERTi-11/ERTi-12 Ti15333/Nitinol Alloy |
|
Standard |
AWS A5.16/ASTM B863/ASME SB863, ASTMF67, ASTM F136, ISO-5832-2(3) etc |
|
Shape |
Titanium Coil Wire/Titanium Spool Wire/Titanium Straight Wire |
|
Wire Gauge |
Dia(0.06--6) *L |
|
Process |
Bar billets-hot rolling-drawing-annealing-strength-pickling |
|
Surface |
Polishing, picking, acid washed, black oxide |
|
Main Technique |
Hot Forged; Hot Rolled; Cold drawn; Straighten etc |
|
Material Milling Certificate |
According to. EN 10204.3.1 |
|
Application |
Welding, Industry, Medical, Aerospace, Electronic etc |
The company boasts leading domestic titanium processing production lines, including:
German-imported precision titanium tube production line (annual production capacity: 30,000 tons);
Japanese-technology titanium foil rolling line (thinnest to 6μm);
Fully automated titanium rod continuous extrusion line;
Intelligent titanium plate and strip finishing mill;
The MES system enables digital control and management of the entire production process, achieving product dimensional accuracy of ±0.01μm.






