Titanium Grade 2 Strip
What is Titanium Grade 2 Strip?
Grade 2 titanium strips characteristics are almost similar to Grade 1 Titanium Strips characteristics but are a bit stronger.
This Grade 2 titanium strip does offer a great balance of ductility and strength.
It is also resistant to corrosion and very oxidizing.
Just like the grade 1 titanium strips, this grade 2 titanium strips also have excellent weldability.
Grade 2 titanium strip is unalloyed titanium with the best weight to strength ratio to resist any form of corrosion.
Its features make it excellent for use in offshore oil installation, heat exchangers, bleaching plants in the paper industry, water pipe lines and contender tubing.
Grade 2 titanium strips are excellent for use in applications that require oxidation resistance of 600 ° F and strengths of 400 ° F.
Professional titanium material supplier - GNEE
Specification
Chemical Composition :
| C | Fe | H | N | O | Ti | |
| Max | Max | Max | Max | Max | Max | |
| 0.1 | 0.3 | 0.015 | 0.03 | 0.25 | 99.2 |
Mechnical Properties :
| Hardness, Knoop | 170 | 170 | |
| Hardness, Rockwell B | 80 | 80 | |
| Hardness, Vickers | 145 | 145 | |
| Tensile Strength, Ultimate | 344 MPa | 49900 psi | |
| Tensile Strength, Yield | 275 - 410 MPa | 39900 - 59500 psi | |
| Elongation at Break | 20 % | 20 % | |
| Reduction of Area | 35 % | 35 % | |
| Modulus of Elasticity | 105 GPa | 15200 ksi | In Tension |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poisson's Ratio | 0.37 | 0.37 | |
| Izod Impact | 114 - 171 J | 84.1 - 126 ft-lb | |
| Fatigue Strength | 300 MPa | 43500 psi | 1E+7 cycles, Unnotched |
| Fatigue Strength | 425 MPa | 61600 psi | 30,000 cycles, Unnotched |
| Fracture Toughness | 66 MPa-m½ | 60.1 ksi-in½ | K(Q); annealed |
| Shear Modulus | 45 GPa | 6530 ksi |
Specifications
| Standard | Designation |
|---|---|
| ASTM | B265 Grade 2 |
| UNS | R50400 |
| ISO | ISO 5832-2 (medical applications) |
| DIN | 3.7035 |
| EN | EN 3.7035 |
| AMS | AMS 4902 |
| ASME | SB265 Grade 2 |
| MIL | MIL-T-9046 |
Surface Finishes Available
| Finish | Description | Roughness (Ra) | Typical Applications |
|---|---|---|---|
| Cold Rolled Bright | Smooth, reflective surface | 0.2 – 0.4 µm | General forming, stamping, visible components |
| 2B Finish | Bright, cold rolled, clean | 0.3 – 0.5 µm | Medical, food processing, clean applications |
| Pickled | Chemically cleaned, matte gray | 0.5 – 1.0 µm | Chemical processing, industrial |
| Annealed & Pickled | Soft temper, clean surface | 0.5 – 1.0 µm | Forming applications |
| Polished | Reflective finish | 0.1 – 0.2 µm | Decorative, architectural |
| Matte Finish | Uniform non-reflective | 0.5 – 0.8 µm | Surface preparation, coating base |
| Skin Pass | Light temper pass | 0.2 – 0.4 µm | Improved flatness |
Testing
Chemical composition test
Physical properties test
Appearance defects inspection
Ultrasonic flaw detection
Metallography detection
Large Scale Factory
Packaging
In order to avoid the titanium strip has any collision in transit or damage, usually coiled and wrapped with pearl cotton (expandable polyethylene), then packed into wooden case.
Our Advantages
1. Advanced production equipment, support various size customization.
2. We have certificates ISO9001 & SGS&BV.
3. High Quality and Professional Services.
4. Support any third party detection.
5. Any MOQ.
6. Shipment of goods -More than 150 countries worldwide.
7. We have the most convenient transport and prompt delivery.
High level of titanium production technology
GNEE Participation in Exhibitions
Hot Tags: titanium grade 2 strip, China titanium grade 2 strip manufacturers, suppliers, factory, titanium, titanium foil color, titanium foil disposal, titanium foil elasticity, titanium foil bonded, Titanium Grade 1 Alloy Foil, titanium foil preservation
Previous
Titanium Grade 1 Strip CoilYou Might Also Like
Send Inquiry