Titanium Grade 7 Pipe
video

Titanium Grade 7 Pipe

ASTM Grade 7, UNS R52400, CP titanium, C.P. titanium alloy Introduction Titanium alloys have several advantageous attributes that allow their use in industries like automobiles, consumer electronics, military, aerospace, medical, marine, and sports equipment. Grade 7 Ti-0.15Pd alloy is highly...
Send Inquiry
Chat Now
Product Introduction
 
Products Description
 

 

ASTM Grade 7, UNS R52400, CP titanium, C.P. titanium alloy

Introduction

Titanium alloys have several advantageous attributes that allow their use in industries like automobiles, consumer electronics, military, aerospace, medical, marine, and sports equipment.

Grade 7 Ti-0.15Pd alloy is highly resistant to corrosion in reducing acids and localized attack in hot halide media. The presence of palladium helps to enhance the alloy's corrosion resistance. This alloy is similar to grade 2 and possesses medium strength and ductility.

The following sections will discuss in detail grade 7 Ti-0.15Pd alloy.

Physical Properties

The physical properties of grade 7 Ti-0.15Pd alloy are tabulated below.

Properties Metric Imperial
Density 4.51 g/cm3 0.162 lb/in3

Mechanical Properties

The following table shows the mechanical properties of grade 17 Ti-0.05Pd alloy.

Properties Metric Imperial
Tensile strength 485 MPa 70343 psi
Yield strength 350 MPa 50763 psi
Elastic modulus 103 GPa 14938 ksi
Elongation in 50 mm (A5) 28% 28%
Hardness (HV) 150 150

Thermal Properties

The thermal properties of grade 7 Ti-0.15Pd alloy are tabulated below.

Properties Metric Imperial
Thermal conductivity (room temperature) 20.8 W/mK 144 BTU in/hr.ft².°F

Welding

Weldability of grade 7 Ti-0.15Pd alloy is rated as excellent. This alloy is a single-phase material, hence the microstructure of the alpha phase is not affected by thermal treatments or welding temperatures.

 

Annealing

Annealing of this material can be performed by heating to 650-760°C (1202-1400°F) for 6 min -2 h and then air-cooled. In case stress relieving is required, the material has to be heated to 480-595°C (896-1103°F) for 15 min - 4 h, and then air-cooled.

Applications

Grade 7 Ti-0.15Pd alloy is used in the following application areas:

Anode/cathode/cell components

Chemical processing equipment

Air pollution control equipment

Pulp/paper bleaching/washing equipment

Hydrometallurgical extraction/electrowinning

Desalination, brine concentration/evaporation

Hot Tags: titanium grade 7 pipe, China titanium grade 7 pipe manufacturers, suppliers, factory, titanium, titanium pipe energy efficiency, titanium pipe performance, titanium pipe packaging, titanium pipe for marine applications, titanium pipe elbows, titanium pipe temperature range

Send Inquiry

whatsapp

Phone

E-mail

Inquiry