Ti-6A1-4V GR5 Titanium Alloy Plate

Ti-6Al-4V (also known as Grade 5) titanium alloy sheet is a common titanium alloy material with excellent performance characteristics for a wide range of applications.
The performance of titanium plate is related to the content of carbon, nitrogen, hydrogen, oxygen and other impurities contained, the purest titanium iodide impurity content of no more than 0.1%, titanium plate its strength is low, high plasticity. 99.5% of the performance of industrial pure titanium as follows: density of 4.5g/cm3, melting point of 1725 ° C, the coefficient of thermal conductivity of 15.24W / (m.K), tensile strength of 539MPa, elongation rate of 25%, sectional shrinkage rate of 25%. Absorption of gas and the resulting hard brittle surface layer depth of up to 0.1 ~ 0.15 mm, the degree of hardening of 20% to 30%. Titanium's chemical affinity is also large, easy and friction surface adhesion phenomenon.

titanium plate Enterprise

Exceptional Strength-to-Weight Ratio: Approximately 40% lighter than steel with strength comparable to many steels

High Strength: Tensile strength ≥ 895 MPa (130 ksi) in annealed condition

Excellent Corrosion Resistance: Resistant to seawater, chlorides, and a wide range of industrial chemicals

Good Fracture Toughness: Reliable performance in critical applications

Heat Treatable: Strength can be further enhanced through heat treatment

Good Fabricability: Can be formed, machined, and welded with appropriate techniques