Grade 23 Titanium Plate
High Strength Grade 23 Titanium Plate
Excellent Ductility Grade 23 titanium Plate
Grade 23 Titanium Plate

Grade 23 Titanium Plate

Name: Grade 23 Titanium Plate - China Grade 23 Titanium Plate Manufacturers Suppliers Factory - Gnee Steel
Brand: GNEE
SKU: 232389512

Grade 23 titanium sheet is a medical grade titanium alloy with a high modulus of elasticity for applications requiring high stiffness, such as medical implants.

Send Inquiry

Chat Now

Product Introduction

What is Grade 23 High Modulus Titanium Plate?

Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron. It has better ductility and fracture toughness that Titanium Grade 5.
Excellent in Saltwater Environments
Improved Ductility
Extended Durability Titanium

Ti-6Al-4V ELI Ti 6-4ELI Grade 23 Titanium Alloy GENERAL INFORMATION: Ti-6Al-4V alloy is the most widely used alpha-plusbeta type of titanium alloy and the most common of all titanium alloys. This modified alloy contains extra low interstitial (ELI). This forged material is suitable for applications requiring moderate strength, good strength-to-weight ratio and good corrosion performance. This alloy is commonly used in medical implants that require high strength. The alloy is available as castings, wire, bar, plate, sheet, forgings, rings and billets.

Titanium plate suppliers

Grade 23 Drop-resistant titanium plate

Chemical composition

Element	Min [wt%]	Max [wt%]
Al	5,5	6,5
V	3,5	4,5
Fe	-	0,25
O	-	0,13
C	-	0,08
N	-	0,05
Ti	Balance	Balance

Gr23 titanium plate has very high elasticity, and chemical stability, non-magnetic, non-toxic, its modulus of elasticity and expansion coefficient is consistent with the human skeleton, so it has excellent biocompatibility, and it is gradually replacing stainless steel, Co-Cr alloy and so on in the field of biomedicine.

Mechanical Properties (High Modulus Variant)

Property	Standard Grade 23	High Modulus Grade 23	Units
Elastic Modulus (Longitudinal)	105 – 115	125 – 140	GPa
Elastic Modulus (Transverse)	105 – 115	110 – 120	GPa
Tensile Strength (Ultimate)	≥ 860	≥ 860 – 950	MPa
Yield Strength (0.2% Offset)	≥ 795	≥ 795 – 880	MPa
Elongation	≥ 10	8 – 12	%
Reduction of Area	≥ 25	20 – 30	%
Hardness (Rockwell C)	30 – 34	32 – 36	HRC
Fracture Toughness (KIC)	60 – 80	55 – 75	MPa√m
Fatigue Strength (10⁷ cycles)	450 – 550	480 – 580	MPa

Physical Properties

Property	Standard Grade 23	High Modulus Grade 23	Units
Density	4.43	4.43 – 4.45	g/cm³
Melting Point	1605 – 1660	1605 – 1660	°C
Thermal Conductivity	6.7 – 7.5	6.7 – 7.5	W/m·K
Electrical Resistivity	1.7 – 1.8	1.7 – 1.8	µΩ·m
Specific Heat Capacity	560	560	J/kg·K
Coefficient of Thermal Expansion	8.6 – 9.2	8.4 – 9.0	µm/m·°C
Magnetic Properties	Non-magnetic	Non-magnetic	–
Poisson's Ratio	0.31 – 0.33	0.30 – 0.32	–
Beta Transus Temperature	980 – 1010	980 – 1010	°C

Standard Size Availability

Thickness Range	Width Range	Length Range	Typical Applications
0.5 – 3.0 mm	1000 – 1250 mm	2000 – 3000 mm	Aerospace skins, medical implants
3.0 – 10.0 mm	1000 – 1500 mm	2000 – 4000 mm	Structural components
10.0 – 25.0 mm	1000 – 1500 mm	2000 – 4000 mm	Load-bearing structures
25.0 – 50.0 mm	1000 – 1250 mm	2000 – 3000 mm	Heavy components, test blanks

Why Choose Our Grade 23 High Modulus Titanium Plates?

Verified Modulus Enhancement	Documented modulus values up to 140 GPa
ELI Chemistry	Superior fracture toughness and biocompatibility
Controlled Texture	Optimized crystallographic orientation for maximum stiffness
Full Traceability	Complete documentation from ingot to finished plate
Quality Certified	ISO 9001, AS9100, ISO 13485 compliant
Dimensional Accuracy	Precise thickness and flatness control
Technical Support	Metallurgical engineering assistance for design optimization
Custom Processing	Tailored properties for specific applications