Titanium Grade 5 High Pressure heat exchangers Coiled Tube - Knowledge

GR4 products provided by GNEE

Products Description

Grade 5 titanium tubing is an alpha-beta titanium alloy used in seawater and oil and gas industry applications. This tubing offers strong corrosion resistance to chloride ions and most oxidizing media at low to medium temperatures. GNEE offers a wide range of Grade 5 titanium tubing products. Ti-6Al-4V tubing is the most widely used titanium tubing in the world. This material is only half as hard as commercially pure titanium, but nearly twice as strong. This quality stems from its composition of 90% titanium, 6% aluminum, and 4% vanadium.

This composition also gives Grade 5 titanium tubing a high melting point of 1632 degrees Celsius, as well as a minimum tensile strength of 950 MPa and a minimum yield strength of 880 MPa. Due to these enhanced mechanical properties, Grade 5 titanium tubing is also used in high-temperature and high-stress applications such as the aerospace industry, heat exchangers, and power plants. Titanium alloy Gr 5 seamless tubing offers high dimensional accuracy, making it a preferred choice for complex applications.

Sizes And Schedule Specifications of Titanium Alloy Gr 5 Tubes

Specifications	ASTM B163, B516 / ASME SB163, B516
Dimensions	ASTM, ASME and API
Tubes Size	6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk.
Schedule	SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type	Seamless / ERW / Welded / Fabricated / LSAW Tubes
Form	Round, Square, Rectangular, Hydraulic Etc
Length	Single Random, Double Random & Cut Length.
End	Plain End, Beveled End, Treaded

Small diameter Titanium Steel Alloy pipe

Titanium Super Alloy Cold Drawn Welded Pipes

Titanium Grade 5 Seamless Tubes Chemical Compatibility

Grade	Ti	C	Fe	H	N	O	Al	V
Ti Grade 5	90 min	0.1 max	0.4 max	0.015 max	0.05 max	0.20 max	5.5-6.75max	3.5-4.5

Mechanical Analysis of Ti. Alloy Grade 2 ERW Tubes

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr. 5	4.43 g/cm3	1632 °C (2970 °F)	Psi – 138000 , MPa – 950	Psi – 128000 , MPa – 880	14 %

Grade 5 Titanium Capillary Tubing Size Chart

Wall	Sizes ( O.D.)
.010	1/16" , 1/8" , 3/16"
.020	1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012	1/8"
.016	1/8" , 3/16"
.028	1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035	1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049	3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065	1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083	1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095	1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109	1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120	1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125	3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134	1"
.250	3"
.375	3 1/2"

Titanium products provided by GNEE

titanium pipe/tube

Grade

TA1 TA2 TC4 TA9-1 TA18

Gr1 Gr2 GR5 Gr7 GR 9 Gr11 Gr12

size

OD. 6mm~13mm Max Length 4m

OD.13mm~114.3mm, Max Length 15m

WT.0.3mm~12mm

Standard

GB/T3624 GB/T3625 ASTM B337 B338 B861 B862

ASME SB338 ASME SB337 ASME SB861 SB862

Dimension (MM)

Size Range: Φ10-Φ168 x0.5-10x 100-18000 MM

Φ 5/8"xBWG20*L

Application

heat exchanger and Condenser; U Type coil pipe ;

Petroleum pipeline ; Sea farming;

Evaporator; Fluid Transportation Piping etc.

Inspection Equipment

100% Nondestructive Tester; UT Testing Detector; Tensile Tester

Digital Ultrasonic Detector; Infrared Tester; HV Hardness Tester

Get the latest quote

titanium rod/bar

Product name	Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Tianium alloy rod
Standard	ASTM B348/ASTM F136/ASTM F67/AMS 4928/AMS 4965L
Grade	GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23
Diameter	6-500mm,customizable
Length	Max6000mm
Supply state	Hot working state, Cold working state, Annealed state, Solid solution state
Surface	Acid surface or polishing, sand blasted surface
Shape	Round, flat, square, hexagonal
Application	Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc.

Get the latest quote

titanium plate/sheet/strip

Item	Titanium plate,Titanium sheet
Grade	GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23,etc.
Size	0.3-80mm≤300-1500mm≤12000mm or customizable
Standard	ASTM B265,ASTM F136,AMS 4900,AMS 4901,AMS 4911,AMS 4919, AMS 4914
MOQ	10kg
Quality and test	Hardness test, Bending test, Hydrostatic etc.
Application	Industrial, Aerospace, Petrochemical, Medical etc.
Feature	High strength, Corrosion resistance, High performance
Technics	Hot rolled, Cold Rolled
Surface	Bright, Polished, Pickling, Sandblasting
Processing Service	Bending, Welding, Decoiling, Cutting, Punching
Package	Wooden Box

Get the latest quote

titanium wire

Product Name	Polished 1mm 1.5mm 2mm 3mm Nitinol Shape Memory Straight Wire Nickel Titanium Wire for Medical
Material Type	NiTiCu NiTi, Fe NiTi
AF Temperature	Room Temperature(0C - 15C) Low temperature (Below 0C) High temperature(40C - 120C)
Feature	Superelastic or Shape memory
Standard	ASTM F2603-18/12
Surface	Natural Oxide, Pickled/Etched, Centerless Ground and Mechanically-cleaned
Condition	As Cold-Worked, Straight Strain Annealed and Shape Set Annealed.
Certificate	Transformed Temperatures, Tensile Properties, Chemical Composition and Customer Specific Requirements
Surface	Polishing, picking, acid washed, black oxide
Application	1. Medical field : with very good biocompatibility with human body, medical nitinol wire can be used in medical field. 2. Eye glasses manufacturer : Low density, high toughness, high stability, biocompability with human boday, nickel titanium alloy wire is becoming more popular between eye glasses manufacturers. 3. Fishing wire: nickel titanium alloy wire now is widely used as fishign wire because of its high strenght and very good memorability and superelastic.

Get the latest quote