Grade 23 Ti 6Al 4V ELI Alloy Titanium Plate
This standard specifies the chemical composition, microstructure and mechanical properties (tensile and bending) of the widely used Ti6Al4V titanium alloy. Tolerances for the individual chemical elements as well as for the mechanical properties are provided. The test methods for microstructure (ISO 20160, EN 3114-003) and the mechanical properties (ISO 6892-1, ISO 7437) are referenced.
Send Inquiry
Chat Now
Product Introduction
Products Description
The physical properties of grade 23 Ti 6Al 4V ELI alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 4.43 g/cm3 | 0.160 lb/in3 |
| Melting point | 1604 - 1660°C | 2919 - 3020°F |
Mechanical Properties
The following table shows mechanical properties of grade 23 Ti 6Al 4V ELI alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 860 MPa | 125000 psi |
| Yield strength | 790 MPa | 115000 psi |
| Poisson's ratio | 0.342 | 0.342 |
| Elastic modulus | 113.8 GPa | 16510 ksi |
| Shear modulus | 44.0 GPa | 6380 ksi |
| Elongation at break | 15% | 15% |
| Hardness, Brinell | 326 | 326 |
| Hardness, Knoop | 354 | 354 |
| Hardness, Rockwell C | 35 | 35 |
| Hardness, Vickers | 341 | 341 |
Image
Hot Tags: grade 23 ti 6al 4v eli alloy titanium plate, China grade 23 ti 6al 4v eli alloy titanium plate manufacturers, suppliers, factory, Pure Titanium Strip, 1mm titanium sheet, Titanium Sheet Industrial, Gr9 thin titanium wire, Gr2 pure titanium plate, Grade 5 Titanium Straight Tube
You Might Also Like
Send Inquiry