GR4 products provided by GNEE
Gr4 Ti6AL4V ELI Medical Titanium Wire
Gr4 Titanium Foil For Industrial
Products Description
Grade 4 titanium tubing is the strongest pure, unalloyed titanium product, exceeding grades 2 and 3. This grade is used almost exclusively in airframes, aircraft engine components, marine vessels, surgical implants, and hydraulic lines. It is characterized by excellent formability and corrosion resistance.
CP Grade 4 titanium tubing/Ti 70 titanium tubing is the strongest of the commercially pure titanium grades. Grade 4 commercially pure titanium tubing is renowned for its excellent corrosion resistance, good formability, and weldability. Grade 4 commercially pure titanium tubing is the strongest pure, unalloyed titanium product. This grade is used almost exclusively in airframes, aircraft engine components, marine vessels, surgical implants, and hydraulic lines. It is characterized by good formability and corrosion resistance. CP1 Grade 4 titanium tubing is often used in marine components due to its excellent corrosion fatigue resistance in seawater. Grade 4 titanium Ti70 alloy tubing is the strongest of the CP grades and rivals stainless steel in many corrosion-resistant applications. Titanium Alloy Grade 4 (3.7065) clad plates, Titanium Alloy Grade 4 UNS R50700 gaskets, Titanium Alloy CP-70 (Grade 4) round tubes, CP 70 Titanium rolled tubes, CP 70 Titanium seamless tubes, and Titanium Alloy Grade 4 welded tubes can all be cold formed by standard methods.
Titanium Grade 4 Mechanical Properties
Titanium grade 4 mechanical properties are that of Ultimate Tensile Strength of 550 MPa (79800 psi). The Yield Tensile Strength of titanium grade 4 is 480 - 552 MPa (69600 - 80100 psi). Titanium grade 4 has an Elongation at Break of 15%. The Modulus of Elasticity of titanium grade 4 is 105 GPa (15200 ksi). The Poisson's Ratio of titanium grade 4 is 0.37. Titanium grade 4 has an Electrical Resistivity of 6e-005 ohm-cm.
Grade 4 Titanium Ti70 Alloy Chemical Composition
| Grade | C | N | O | H | Ti | Fe |
|---|---|---|---|---|---|---|
| Titanium Gr 4 | .08 max | .05 max | .40 max | .015 max | Bal | .50 max |
Titanium CP1 Grade 4 Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Titanium Gr4 | 3.7065 | R50700 |
Titanium products provided by GNEE
|
Standard
|
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862,AMS4911,AMS4928
|
|
Material Grade
|
Gr1, Gr2, Gr4, Gr7, Gr9, Gr11, Gr12, etc
|
|
Length
|
≤15000mm
|
|
Size(mm)
|
Diameter 3-114mm
|
|
Section shape
|
Round / Square
|
|
Tolerance |
a) Outer Diameter: +/- 0.01mm
|
|
b) Thickness: +/- 0.01mm
|
|
|
c) Length: +/- 0.1mm
|
|
|
Surface
|
Pickling, annealing, polishing, bright.
|
|
Feature
|
1.Low Density and High Strength
2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic 6.Good thermal properties 7.Low Modulus of Elasticity |
|
Test
|
Squash test, extended test, water pressure test, crystal rot test, heat treatment, NDT
|
|
Material
|
Pure titanium and Titanium alloy
|
|
Titanium Grade
|
GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
|
|
Standard
|
ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4928 etc
|
|
Shape
|
Titanium round rod/bar, Titanium square rod/bar,Titanium flat rod/bar
Titanium rectangle rod/bar, Titanium hex rod/bar |
|
Diameter
|
1-300mm,customizable
|
|
Length
|
50mm-6000mm,customizable
|
|
Tolerance
|
h6~h13 H10~H13
|
|
Surface
|
Bright/Polished/ Machined
|
|
Main Technique
|
Hot Forged; Hot Rolled; Cold drawn; Straighten etc
|
|
Heat Treatment
|
Usually are Annealled,but Solid Solution & Aging can be also OK
|
|
Material Milling Certificate
|
According to. EN 10204.3.1
Including Chemical composition and Mechanical property |
|
Application
|
Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical, aerospace, etc.
|
|
Standard |
ASTM B265 JIS H4600 GB/T 3620.1 |
|
Grade |
ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11JIS Pur Ti: Class 1 Class 2 Class 3 Class 4;Ti Alloy: Class 60 |
|
Size |
thickness 0.3mm~100mm; Width 50mm~2500mm; Length 1000mm~12000mm |
|
Surface |
Mill finish, polished, anodizing, brushing, sand blasting, powder coating,etc |
|
Application |
1)Further making utensil. |
|
Grade |
GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 etc.
ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-11, ERTi-12 |
|
Size |
Dia：0.1-8mm or customizable |
|
Standard |
ASTM B348,ASME SB348,ASTM B863,AWS.A5.16,GB/T3623-2007 |
|
MOQ |
10kg |
|
Quality and test |
Annealing, Ultrasonic testing |
|
Application |
Aerospace, Chemical, Medical, Eye Frames,Welding etc |
|
Feature |
High strength,Light weight,Excellent heat conduction and corrosion resistance |
|
Condition |
Annealed (M), Hot Worked (R), Cold Worked (Y) |
|
Surface |
Bright, Polished, Pickling, Sandblasting |
|
Package |
Wooden Box |
